User manual PHILIPS MCM233

[. . . ] Register your product and get support at Micro System MCM233 EN User manual DA Brugervejledning DE Benutzerhandbuch ES Användarhandbok 3 21 39 59 FR Mode d'emploi IT Manuale utente 78 97 117 137 NL Gebruiksaanwijzing SV Användarhandbok Contents 1 Important Safety Notice 4 4 5 7 Other features Set the alarm timer Set the sleep timer Play from an external device 17 17 17 17 2 Your Micro Hi-Fi System Introduction What's in the box Overview of the main unit Overview of the remote control 7 7 7 8 9 8 Product information Specifications USB playability information Supported MP3 disc formats Maintenance 18 18 18 19 19 3 Get started Placement Prepare the remote control Connect power Auto install radio stations Set clock Turn on 11 11 11 11 12 12 12 9 Troubleshooting 20 4 Play Play a disc Play from USB 13 13 13 5 Listen to radio Tune to a radio station Program radio stations automatically Program radio stations manually Select a preset radio station FM stations with RDS 14 14 14 14 14 14 6 Play options Pause/resume play Skip to a track Search within a track Select repeat/shuffle play options Program tracks Display time Adjust volume level Mute sound Select a preset sound effect Enhance bass 15 15 15 15 15 15 15 15 16 16 16 EN 3 English 1 Important Safety a Read these instructions. g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] m DBB · Turn on or off dynamic bass enhancement. n REPEAT/SHUFFLE · Play a track or all tracks repeatedly. o · 10 EN Stop play or erase a program. 3 Get started Caution · Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. 3 Close the battery compartment. 1 3 2 Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the rear of the apparatus. ___________________________ Note · If you are not going to use the remote control for a long time, remove the batteries. · Do not use old and new or different types of batteries in combination. · Batteries contain chemical substances, so they should be disposed of properly. Placement You can place the unit on a flat surface or mount the unit on a wall. Connect power Caution · Risk of product damage!Ensure that the power supply · voltage corresponds to the voltage printed on the back or the underside of the unit. When you unplug the AC power cord, always pull the plug from the socket. Before you connect the AC power cord, ensure that you have completed all other connections. Mount on a wall To wall mount the unit, see the included separate sheet of wall mounting instructions. Prepare the remote control Caution · Risk of explosion!Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. · To insert the remote control battery: 1 2 Open the battery compartment. Insert 2 AAA batteries (not supplied) with correct polarity (+/-) as indicated. EN 11 English 1 Connect the power adaptor to: · the DC IN jack on the main unit. · the wall outlet. 6 7 Press / to set the minute. Press PROG/CLOCK SET to confirm the clock setting. Auto install radio stations When you connect power and no radio stations are stored, the unit automatically begins to store radio stations. Turn on 1 Press . » The unit switches to the last selected source. 1 Connect the unit to the power supply. » [AUTO INSTALL PRESS -- PLAY KEY](auto install press -- play key) is displayed. Press on the main unit to start installation. » The unit automatically stores radio stations with sufficient signal strength. » When all the available radio stations are stored, the first preset radio station is broadcast automatically. Switch to standby 2 1 Press again to switch the unit to standby mode. » The clock (if set) appears on the display panel. To switch the unit to Eco Power Standby mode: 1 In the standby mode, press and hold for more than 2 seconds. » The backlight on the display panel turns off. Tip Set clock Note · You can set the clock in the standby mode only. · The unit switches to Eco Power Standby mode after 15 minutes in standby mode. 1 Press and hold PROG/CLOCK SET to enter the clock setting mode. » [SET CLOCK](set clock) scrolls on the screen. » The first programmed radio station is broadcast automatically. · For optimal reception, fully extend and adjust the position of the antenna. FM stations with RDS Radio Data System (RDS) is a service that sends additional broadcast information along with FM stations. [. . . ] If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power · Ensure that the AC power plug of the unit is connected properly. [. . . ]