User manual PHILIPS MX2500

[. . . ] DVD Home Theatre System MX2500 User manual Visit us at www. p4c. philips. com for service support 1 001-035-MX2500-00-Eng 1 9/16/04, 10:44 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Norge Typeskilt finnes på apparatens underside. Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten. [. . . ] 5 Press ÉÅ to start programme playback. 6 Press Ç to stop playback or exit programme mode. Clearing the programme G Stop playback, then press the Ç again. Helpful Hints: ­ If the DVD system is disconnected from the power supply, it will erase the programme. ­ For VCD, the programme option is only possible if the PBC mode is turned off. Repeating a section within a chapter/ track 1 While playing a disc, press REPEAT A-B at the starting point. 2 Press REPEAT A-B again at the point to end the section. The section A and B can be set only within the same chapter/track. The section will now repeat continuously. 3 Press REPEAT A-B again to resume normal playback. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs. 20 001-035-MX2500-00-Eng 20 9/16/04, 10:47 Disc Operations then press OK to open the folder (for MP3 disc only). The title menu appears on the TV. IMPORTANT!You have to turn on your TV and set to the correct Video In channel. (See page 14 "Setting the TV"). 4 Use 1 2 3 4 keys to select a desired title, then press OK to start playback. G You can also use the numeric keypad (0-9) to enter your choice. During playback, you can; G Press S / T to select another title/ picture in the current folder. G Use 1 2 3 4 keys to rotate/ flip the picture files. G Press ÉÅ to pause / resume playback. 1 Stop playback, then press SYSTEM MENU. 2 Press 1 2 to select the programme menu. The menu bar will appear across the top of the TV screen. and press 4 to enter PROGRAM P 00 : 00 3 Use the numeric keypad (0-9) to enter the track number to be programmed. "FULL" will appear if you have programmed 99 tracks. 5 To stop playback, press Ç. Helpful Hints: ­ Due to the recording nature of Digital Audio MP3 (DAM), only digital audio music will play. ­ It is normal to experience an occasional "skip" while listening to your MP3 discs. ­ It may not be possible to play certain MP3 or JPEG disc due to the configuration and characteristics of the disc or condition of the recording. ­ For multi-session discs with different formats, only the first session will be available. 4 Press ÉÅ to start programme playback. To clear the programme G Stop playback, then press Çagain. Playing MP3/Picture disc (Kodak, JPEG) IMPORTANT!You have to turn on your TV and set to the correct Video In channel. (See page 14 "Setting the TV". ) JPEG and MP3 simultaneously playback 1 Select a MP3 track and press NIGHT. `Music Slide show' appears on the TV. [. . . ] These jacks send audio through multiple channels, instead of just two channels as analogue does. Dolby Digital: A surround sound system developed by Dolby Laboratories containing up to six channels of digital audio (front left and right, surround left and right, centre and subwoofer). Dolby Pro Logic II: It creates five fullbandwidth output channels from two-channel sources. Decode only systems that derive 5. 1 channels instead of the conventional four channels of Dolby Pro Logic surround sound. [. . . ]