User manual PHILIPS MZ1100

[. . . ] Once completed, you can listen to the last tuned radio station. if "P" appears on the display , you can press S T to select the previous/next presetting radio stations. When tuning to a weak reception or non-preset radio station, press É to deactivate the preset Å mode ("P" will disappear from the display), then press S T. Load in a CD/MP3 CD with the label facing right. [. . . ] Press to select repeat the current track or repeat the whole disc or switch off the repeat mode. ÉÅ press to toggle between frequency tuning and preset number selection mode. Press to select repeat the current track or repeat the whole disc or switch off the repeat mode. Plug and Play allows you to store all available radio stations automatically, starting from FM and followed by MW band. When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station will be played. ­ During Plug and Play, if no button is pressed within 15 seconds, the system will exit Plug and Play mode. If you do not complete the Plug and Play installation, the function will be restarted when you next turn on the main supply again. When "P" appears on the display, it only enables preset number selection. Press É Å to toggle between frequency tuning and preset number selection. It enables you to programme all available radio stations automatically from a selected preset number, starting from FM and followed by MW band. If no preset number is shown, automatic preset will begin from preset (1) and all your former presets will be overridden. Note: ­ If a radio station has been stored in one of the presets, it will not be stored again under another preset number. Make sure "P" appears, if not pressÉÅ . It enables you to programme only the favourite radio stations. Q Hold down S T for fast tuning, release it when the frequency indication starts to change. for tuning to a weak reception radio station , press S T briefly and repeatedly. Q Repeat the steps again to store other radio stations. Notes: ­ If you attempt to programme more than 40 preset radio stations, "PROGRAM FULL" is displayed. ­ During programming, if no key is pressed within 20 seconds, the system will exit the programme mode automatically. Make sure "P" appears, if not pressÉÅ . When the preset radio station is deleted The deleted radio frequency remains on the display until you select another preset number. The preset numbers of all other preset radio stations in the band with higher numbers are also decreased by one. [. . . ] ­ If the CD source is selected, the timer will wake you up by playing the first track of the disc or programmed track. if the disc loader is empty , it will switch to Tuner mode. ­ If the Tuner source is selected, the timer will wake you up by playing the last tuned radio station. To save the power consumption, it is advisable to switch the system to Eco Power standby mode or disconnect the system from the power supply completely when not in use. [. . . ]