User manual PHILIPS QG3371/16

[. . . ] english 5 -- The adapter contains a transformer. -- If the adapter is damaged, always have it replaced with one of the original type in order to avoid a hazard. -- Always check the appliance before you use it. Do not use the appliance if any of its parts is damaged or broken, as this may cause injury. [. . . ] Styling/contouring your beard You can use the precision trimmer to cut shapes in beard hair or scalp hair. It cuts hair very close to the skin (to a length of 1mm). 10 English Caution: Be careful when you use the precision trimmer because it removes every hair it comes in contact with. 1 Place the precision trimmer on the handle (1) and turn it clockwise to fix it (2). € 2 To achieve a good cutting result, move the precision trimmer against the direction of hair growth. Always make sure the precision trimmer is in full contact with the skin. 3 Make careful and controlled movements with the precision trimmer. Tip: For the perfect finish, you can use the mini foil shaver to make the edges and lines of your beard style even smoother. Grooming facial hair (nose and ear hair) Trimming nose hair 1 Place the nose/ear hair trimmer on the handle (1) and turn it clockwise to fix it (2). 3 Switch on the appliance and insert the tip of the trimmer into one of your nostrils. 4 Slowly move the tip in and out while turning it round at the same time to remove unwanted hair. English 11 To reduce the tickling effect, make sure that you press the side of the tip firmly against the skin. Trimming ear hair 1 Place the nose/ear hair trimmer on the handle (1) and turn it clockwise to fix it (2). 3 Switch on the appliance and move the tip softly round the ear to remove hairs that stick out beyond the rim of the ear. 4 Carefully insert the tip into the outer ear channel. 5cm into the ear channel as this could damage the eardrum. Cleaning Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Note:The appliance does not need any lubrication. 1 Make sure the appliance is switched off and disconnected from the mains. 2 Remove any comb and/or attachment from the appliance. 3 Blow and/or shake out any hair that has accumulated in the attachments and/or combs. 12 English 4 Clean the attachments, the combs and the appliance under a lukewarm tap or with the cleaning brush. [. . . ] clean the attachment under a element lukewarm tap. Of the attachment you are using is dirty. Remove the attachment from the The cutting appliance. clean the attachment under a element lukewarm tap. [. . . ]