User manual PHILIPS REMOTE CONTROL HOTEL TV RG4172BK

[. . . ] This remote is fully backward compatible with previous commercial chassis setup remotes, but has added functionality. The three buttons at the bottom of the remote, TV Guest, TV Setup, and DCM Setup, are called function buttons. They are used to select the desired function to be performed. TV Guest mode will emulate the "Guest" remote commands. [. . . ] Press the SELECT button for the display access functions to appear on the screen. Depending on the model and its features, some or all of the display functions and features described below will be valid. + ADD CHANNEL This function allows individual channels to be added or deleted from memory. Tune the desired channel by using the CHAN-> DELETE xx NEL UP/CHANNEL DOWN buttons or by random access, and then press the + or - button to either add or remove a channel from memory. This function will give a name, up to eight characters, to a channel. Press the - button to delete any existing label. Press the + button to activate this function. Once in modification display, a cursor will point to the position on the label. The + and - buttons will scan through the available characters. The RESET button will move the cursor to the next position on the label. Press the + button to allow the continuous display of the cur+ REMINDER ON -> REMINDER OFF rent channel number. Press the - button and the channel number will appear for only a few seconds after the channel change. It will then disappear. PICTURE -. . . . . . . . . . . . . . . . . + BRIGHTNESS -. . . . . . . . . . . . . . . . . + COLOR -. . . . . . . . . . . . . . . . . + TINT -. . . . . . . . . . . . . . . . . + SHARPNESS -. . . . . . . . . . . . . . . . . + Press the + or - button to adjust the picture to the desired level. Press the + or - button to adjust the brightness to the desired level. Press the + or - button to adjust the color to the desired level. Press the + or - button to adjust the tint to the desired level. Press the + or - button to adjust the sharpness to the desired level. Press the + or - button to set the maximum volume available from the keyboard or the Guest transmitter. LABEL xx + MODIFY - DELETE VOLUME LIMITER -. . . . . . . . . . . . . . . . . + Press the + button to disable the normal functioning of the volume control. This forces the volume to the maximum level allowed by the volume limiter described in the next step. In this mode, the mute function is disabled. Press the (-) button for "standard volume up/down, " allowing normal volume control operation. Press the VOLUME UP or VOLUME DOWN button to + SET MAX VOL xx set the maximum level available. The range is made up of (VOL FORCED MAX) 63 steps from minimum to maximum. + VOLUME FORCED MAX ->STD VOL UP/DOWN This function will determine what channel the TV will tune to at initial turn on. [. . . ] Smart Sound allows you to preset a desired volume level that the TV sound will not exceed. Press the + or - button to select the language you prefer. You may choose English, Spanish (Español), or French (Français), This function allows the TV to scan all the channels and AUTO PROGRAMMING automatically program in memory all active channels on + TO BEGIN the system. Press the + button to activate auto programming. [. . . ]