User manual PHILIPS RI9753

[. . . ] Before using the machine, please read the attached operating instructions. When using electrical appliances, basic safety precautions should always be followed, including the following: 1. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid. Close supervision is necessary when the appliance is used by or near children. [. . . ] Coffee dispensing is then restarted and completed. Place one cup if you want one coffee only. Press the coffee button: once for 1 coffee twice for 2 coffees Appuyer sur le bouton central. When the machine has finished brewing, remove the cup(s). Dispensing may be preceded by short sprays of hot water, and scalding is possible. The hot water/steam wand may reach high temperatures: do not touch it with bare hands. Wait for the container to be filled with the desired quantity of hot water. Turn the knob until it is in the rest position ( ). Dispensing may be preceded by short sprays of hot water, and scalding is possible. The hot water/steam spout may reach high temperatures: do not touch it with bare hands. Turn the knob until it is in the rest position ( ). After frothing the milk, brew coffee into the cup for a creamy cappuccino. When the wand has cooled down, disassemble it and wash it carefully. In case of conflict, priority must be given to what is indicated in the operation and maintenance manual over the instructions provided on separately sold accessories and materials. Never drink the descaling solution or any products dispensed until the cycle has been carried out to the end. never use vinegar as a descaling solution. When descaling is performed, someone must be present during the entire process (approx. Limescale normally builds up with the use of the appliance. Descaling should be performed every 1-2 months or when the machine displays the relevant message. Use the Saeco descaling solution only, specially designed to comply with the technical specifications of the machine, to ensure the machine performance will not decrease over time, and to guarantee a safe and risk-free use. The descaling solution must be disposed of according to the manufacturer's instructions and/or applicable regulations in the country of use. Before starting a descaling cycle make sure that: 1 A large enough container is available; 2 The water filter (if supplied) has been removed. [. . . ] - Any repairs must be performed by an authorized customer service center. - Do not use the appliance with a defective power cable. If damaged, the power cable must be replaced by the manufacturer or authorized service centre. - Turn off the appliance before opening the service door. [. . . ]