User manual PHILIPS S221C4AFD/00

[. . . ] 1275/2008 Implementing Directive for Standby and Off mode power consumption). Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 20 instructions, may cause harmful interference to radio communications. [. . . ] The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251. 22 5 Informations règlementaires EU Energy Label China RoHS The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products produced and sold for China market have to meet China RoHS request. 中国电子信息产品污染控制标识要求 ( 中 国 RoHS 法规标示要求 ) 产品中有毒有害物 质或元素的名称及含量 有毒有害物质或元素 部件名称 铅 (Pb) O X X X X 汞 (Hg) O O O O O 镉 (Cd) O O O O O 六价 ɓ (Cr6+) O O O O O 多溴联苯 多溴二苯醚 (PBB) (PBDE) O O O O O O O O O O 外壳 液晶显示屏 / 灯管 The European Energy Label informs you on the energy efficiency class of this product. The greener the energy efficiency class of this product is the lower the energy it consumes. On the label, you can find the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year. Note The EU Energy Label will be ONLY applied on the models bundling with MHL-HDMI and TV tuners. Ɯ国家认可的回收处理资质的厂商进行回收处 理。 RF WARNING STATEMENT EUROPE EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/ EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: −− EN60950-1 Safety of Information Technology Equipment −− EN 62311 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz300 GHz) −− EN 300 328 ( For 802. 11b/g/n ) Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2, 4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3. 2 of the R&TTE Directive −− EN 301 489-17 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2, 4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment −− EN 301 489-1 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements −− When entering sleep mode (backlight off), the system will shut down after a week (typical) of time. 資 訊傳輸設備，限於室內使用。 • • USA Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following 24 5 Informations règlementaires two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: −− Reorient or relocate the receiving antenna. [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: (i)  device for operation in the band 5150the 5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems; (ii)  high-power radars are allocated as primary users (i. Priority users) of the bands 52505350 MHz and 5650-5850 MHz and that these radars could cause interference and/ or damage to LE-LAN devices. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. [. . . ]