User manual PHILIPS SATINPERFECT WETDRY HP6577/00

[. . . ] -- Keep the button batteries of the Smart Tweezers out of the reach of children and pets. button batteries are a potential choking hazard. -- Do not insert metal-containing material into the socket on the epilator to avoid short circuiting. [. . . ] For safety reasons, the epilator can only be used cordlessly. The epilator does not work when it is connected to the mains. -- The adapter is equipped with an automatic voltage selector and is suitable for mains voltages ranging from 100 to 240 volts (50 -60 Hz). -- Maximum noise level epilator: Lc = 76dB(A) -- Maximum noise level precision epilator: Lc = 77dB(A) Replacement To purchase accessories for this appliance, please visit our website www. If you have any difficulties obtaining accessories for your appliance, please contact the Philips Consumer Care Centre in your country. You find its contact details in the worldwide guarantee leaflet. Shaving head If you use the shaving head two or more times a week, we advise you to replace the shaving unit after one or two years or when it is damaged. Environment -- Do not throw away the epilator and precision epilator with the normal household waste at the end of their life, but hand them in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 10 English Epilator -- The built-in rechargeable batteries of the epilator contain substances that may pollute the environment. Always remove the batteries before you discard and hand in the epilator at an official collection point. Dispose of the batteries at an official collection point for batteries. If you have trouble removing the batteries, you can also take the appliance to a Philips service centre (Fig. Removing the rechargeable batteries 1 Disconnect the epilator from the adapter. Let the epilator operate until the batteries are completely empty and you can no longer switch on the epilator. 2 Remove the epilating head and open the appliance with a screwdriver (Fig. 3 Use a screwdriver to disconnect the battery holder (1) and the batteries (2) (Fig. Do not try to reassemble the appliance in order to connect it to the mains. [. . . ] Replace the batteries or insert them correctly (see the user manual). Problem During use, the epilator becomes hot and suddenly stops operating. Then the speed lights and the charging light flash red for 30 seconds. [. . . ]