User manual PHILIPS SCD278/00

[. . . ] After 10 minutes, switch off by unplugging from the wall and leave to stand for 30 minutes. Pour the solution away and rinse the warmer with tap water. Citric acid is available from most chemists and through Philips AVENT Customer Service. OR Pour 50ml/2oz of vinegar (white) mixed with 100ml/4oz of cold water into the warmer (with basket in place). [. . . ] This does not affect your statutory rights. 8) During the warming process, the light will come on and off to indicate that the water surrounding the bottle is being heated to the maximum temperature of the setting. 9) Always test the feed and when it has reached the required temperature, remove immediately. 10) Shake the bottle gently and check the temperature of the milk by sprinkling a few drops on to your wrist before you feed your baby. nB: please refer to the timings in Diagram 2. NB: The basket can be removed when heating the AVENT Magic Cup and other makes of bottles. 1 35 – 45 °C 2 45 – 75 °C 3 75 – 85 °C Contents a) Basket b) Warmer body c) Dial d) Baby food container For baby food jars and tins 1) Ensure basket is in place inside the warmer. 2) Remove the lid and place jar or tin in the warmer. 3) Fill the warmer with water to 15 mm (1/2 inch) below the top of the jar/tin. 4) Plug in the unit and switch on at the mains. 6) The warmer will work in the same way as for feeding bottles. Take care when removing the jar or tin as they, and the water surrounding them, will be hot. 7) For small jars/tins you may find it beneficial to place a screw ring from an AVENT Bottle below the jar/tin before adding the water in order to remove the container easily. 8) Stir the food and test it on a spoon yourself to ensure it is not too hot for your baby. 9) Take care not to overheat the feed. The mains supply cord of the appliance CANNOT be replaced. If the cord is damaged, the appliance should be discarded. The lead supplied must not be used on any other appliance and no other lead should be used with the Electric Bottle and Baby Food Warmer. This product is manufactured to comply with the Radio Interference Requirements and the EEC Directive 89/336/EEC. • When in use the warmer contains hot water. [. . . ]  Instructions for Use Care of your warmer Philips AVENT is here to help GB: Call FREE on 0800 289 064 IRL: Call FREE on 1800 509 021 AU: 1 300 364 474 www. Com/AVENT Unplug and allow to cool before cleaning. Remove basket and wipe inside and outside with a damp cloth only, this will keep the warmer looking new. It may be advantageous to use pre-boiled or filtered water in your warmer in order to reduce limescale build up. [. . . ]