User manual PHILIPS SDV5119

[. . . ] When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. 4 EN Congratulations on your purchase and welcome to Philips! [. . . ] The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. 4 EN Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. 2 3 4 5 Gain control knob VHF rod antenna UHF loop antenna Built-in coaxial cable connected to signal output (for TV connection) 12V DC power connection Antenna stand Overview 3 6 7 3 Get started 4 1 To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. 2 Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note 7 · Choose a location near a window which gives the antenna a clear view of the transmitter. 5 6 Note · Place the antenna away from the metal surface to avoid interference. EN 5 English 2 Your SDV5119 1 230-240V AC/12V DC power adaptor (included) Connect to the TV 1 2 One end of the coaxial cable is already connected to the signal output of the antenna. Connect the other end to the input on the TV receiver. 4 Set up SDV5119 For VHF/FM reception 1 Extend the telescopic dipoles to the longest possible length. 3 Connect the DC plug to the antenna and the power supply to a 230-240V AC outlet. 2 Turn the TV or FM radio to the desired channel/station. Move the dipoles in different directions up and down until the reception is achieved. Note · Ensure the antenna flat is set against its base on a horizontal surface. 3 To turn the amplifier up, rotate the gain control knob towards the max position. 6 EN Note · It is possible to turn the gain control knob down for best reception. English For UHF reception 1 2 Turn the TV to the desired channel/ station. Plug your cable/adapter into the antenna and then into your power source. Where should I place the antenna in order to get the best reception possible?Choose a location near a window which gives the antenna a clear view of the transmitter. Note · For best reception, place the antenna away from the metal surface to avoid interference. 6 Warranty and service Warranty information can be found at: www. philips. com/welcome For technical support, send us an email with the model number of the product and a detailed description of your problem to:accessorysupport@philips. com How do I know how much gain (amplification) is required to receive a clear picture?Once you have the VHF dipoles extended to the longest length, turn on the amplifier. Turn the amplifier up to the max position and then reduce as needed. In some case, you need to turn the amplifier down to receive a clearer picture. Can I set up this antenna with a digital tuner? [. . . ] In some case, you need to turn the amplifier down to receive a clearer picture. Can I set up this antenna with a digital tuner?Yes, this antenna can be set up with a digital tuner. [. . . ]