User manual PHILIPS SE6590B

[. . . ] Register your product and get support at www. philips. com/welcome SE6590 US-EN Telephone Answering Machine Warning Use only rechargeable batteries. Charge the handset for 24 hours before use. Table of contents 1 1. 1 1. 1. 1 1. 1. 2 1. 2 1. 3 1. 4 Safety Information Equipment Approval Information Notification to the Local Telephone Company Rights of the Phone Company Interference Information Hearing Aid Compatibility (HAC) FCC RF Radiation Exposure Statement Important Power requirements Electric, Magnetic and Electromagnetic Fields ("EMF") Recycle your batteries The RBRC® seal Service Centers 3 3 3 4 4 5 5 5 6 6 6. 1 6. 1. 1 6. 1. 2 6. 2 Registration Registering the handset Easy registration Manual registration Checking the signal strength Using the Handset Make a call Predialing Direct dialing Answer a call End a call 17 17 17 17 18 18 18 18 18 18 18 7 7. 1 7. 1. 1 7. 1. 2 7. 2 7. 3 8 8. 1 8. 1. 1 8. 1. 2 8. 1. 3 8. 1. 4 2 2. 1 2. 2 2. 3 3 3. 1 4 4. 1 4. 2 4. 3 5 5. 1 5. 2 5. 3 5. 4 5. 5 7 7 7 8 Your phone 10 What's in the box 10 Overview of your handset 11 Display icons and Messages 14 Getting started Connect the charger Install the batteries Charge the batteries Remove/Attach belt clip Install optional headset 15 15 16 16 16 17 8. 2 8. 2. 1 Using the Intercom and Conference Calling 19 Using the Intercom 19 Intercom another unit 19 Transfer an external call to another unit 19 Answer an external call during intercom 20 Switch between an internal and external call 20 Conference calling 20 Establish a three-party conference call 20 Personal settings 21 Change the Handset Name 21 Handset Tones 21 Set the Ring Volume 21 Set the Ring Tones 21 Activate/Deactivate Key Beep 22 9 9. 1 9. 2 9. 2. 1 9. 2. 2 9. 2. 3 Table of contents 1 9. 3 9. 4 9. 5 9. 6 9. 7 9. 8 Change the Display Language Select the Display Wallpaper Select the Color Theme Set the Display Contrast Set the Backlight Time Deactivate/Activate Auto Hang-Up Advanced settings Registration Unregister Technical data INDEX 22 22 22 23 23 23 24 24 24 24 25 10 10. 1 10. 2 11 12 2 Table of contents 1 Safety Information 1. 1 Equipment Approval Information Your telephone equipment is approved for connection to the public switched telephone network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by the ACTA. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. [. . . ] Appears when the ringer is off. Select/ OK Steady on when the answering machine is on. Blinks when messages have been received by the answering machine; blinks rapidly when the answering machine memory is full. Indicates that the handset is registered and within range of the base station. Blinks when the handset is out of range or is searching for a base. Press the key directly below to move to the next menu level or to confirm a selection. OK appears to request confirmation of an operation. Press the key directly below to confirm. Indicates that more options are available in a scroll list, or that you can adjust the volume. 14 Your phone Back/ Back appears when in menu Clear mode. Press the key directly below to return to the previous menu level. Press the key directly below to clear (delete) a character or number when making an entry. SE659 base station only: Appears when using Line 1. L2 CALL Steady ON when there is an incoming call on Line 2 (appears only in talk mode). 5 Getting started Be sure to charge the handset for at least 24 hours before using it for the first time. 5. 1 Connect the charger 1 Place the charger near a power outlet. 2 Connect the power cable to the connector on the charger. L1 L2 Appears when using Line 2. Line 1 Selects Line 1. L1 IN USE Steady ON when another unit is using Line 1 (appears only in talk mode). L1 HOLD Steady ON when Line 1 is on hold (appears only in talk mode). L1 CALL Steady ON when there is an incoming call on Line 1 (appears only in talk mode). L2 IN USE Steady ON when another unit is using Line 2 (appears only in talk mode). L2 HOLD Steady ON when Line 2 is on hold (appears only in talk mode). 3 Connect the other end of the power cable to the power outlet. Warning Power is applied when the power adaptor is plugged into the charger and connected to the power outlet. The only Getting started 15 way to power down the charger is to unplug the power adaptor from the power outlet. Therefore, ensure that the power outlet is easily accessible. The power adaptor must be connected correctly, as incorrect connection could damage the unit. [. . . ] The color theme used on the display will change as you scroll. · A validation tone is emitted and the screen returns to the Personal Set menu. 2 3 Scroll n to Backlight Time and press o Select. Scroll n to the desired backlight time, and press o Select to confirm. · A validation tone is emitted and the screen returns to the Personal Set menu. 9. 8 9. 6 Set the Display Contrast You can change the contrast of the text on the display. [. . . ]