User manual PHILIPS SFF6170DW

[. . . ] Register your product and get support at With the purchase of this device, you have chosen a quality PHILIPS product brand. Their device fulfils the most varied requirements for private use or in your office and business everyday. You use the power and toner saving functions to save electricity and toner, by switching the device to power saving mode or printing in toner saving mode. Use the ECO- button to make toner saving copies quickly and simply. [. . . ] dialing prefix--This dialing code is automatically added to the number before sending (= external access code). Dialing type--In some countries you can set the dialling mode to pulse dialling or tone dialling (DTMF tones). Header--Your name and number appear in the page header of each fax transmission. If you do not wish to send out your information, you can turn this function off. 3 With the following options you set the number of repeat attempts for incomplete fax transfers. Number of tries--Number of repeat attempts for interrupted fax transfers. Interval between tries--Duration between two transfer attempts If the message memory is full, no additional messages can be received. Notice Delete Fax Messages Sent If there are problems with printing out saved fax messages, a service code is available (see also chapter on using service codes , page 75). The device will not receive faxes on its own. This setting is useful, when you want to receive faxes via a modem connected to a computer. Set the number of rings 0 (see also chapter setting the number of rings, page 58) and set the fax reception mode to fax mode (see also chapter setting the fax reception mode, page 60), in order to receive faxes without your device ringing. With fax reception onto a USB storage medium, the device saves incoming faxes onto a connected USB storage medium. Fax messages are saved as TIFF files with receipt date and time. Use the Print Document from USB Storage Medium function to print the saved fax messages (see also chapter Print Document from USB Storage Medium, page 30) Print Document from USB Storage Medium Function not available Notice Function not available The function is switched off if you remove the USB storage medium. You cannot use the Protected Fax Reception and Receive Fax on USB Storage Medium functions at the same time. This allows you to document the exact time at which you have received a fax transmission. A memory buffer in the device ensures that the correct date and time of reception will be maintained even after a power loss. if the time stamp function is activated , incoming faxes will be stored in the fax memory. As soon as the last page has arrived, the arrival time is stored and the device prints out all the pages. You can turn this function off (also see chapter Switches Time Stamp On/Off, page 61). You can secure your fax reception with a code. In that case, incoming faxes are not printed out, but rather are stored in the fax memory. [. . . ] This product is intended for use on an analogue public telecommunications network (PSTN) and in the country specified on the packaging. Use in other countries can result in faulty functioning. For more information, please contact the technical service centre for your country. Should problems arise during use of your machine, please contact your retailer first. [. . . ]