User manual PHILIPS SLE3400EN

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 FCC Compliancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14 Notice for Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Helpline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Brand list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-28 Informationtotheconsumer. . . . . . . . . . . . . . . . . . . 29 . Compliance with EMF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Recycling and disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 1 8 7 YourSLE3400EN Congratulations on your purchase of the Philips SLE3400EN universal remote control. After setting up the remote control you can operate up to 3 different devices with it. SimpleSetup Improved with Philips patented (pending) Simple Setup technology, the SLE3400EN can be set up easily for TV, DVD player / recorder and all common Cable, Satellite and other set top boxes, such as DirecTV, Comcast, AT&T, Verizon, Time Warner, Scientific Atlanta, Tivo and many more. [. . . ] Press the device selection button to select DVD. and pressed simultaneously for 5 seconds. The remote control is now in setup mode. EN 7 6 EN Gettingstarted 2. 2. 2 Improvingbuttons When correctly set up, the remote control should be able to operate all your devices. However, when using the remote control for the first time it might occur that some buttons do not yet function as expected. In this case you can have the remote control search for alternatives. English 4 · 3 singtheuniversal U remotecontrol 3. 1 Buttonsandfunctions 5 The illustration on page 2 gives an overview of all buttons on the remote control. Try out the buttons you need for operating your devices. Notes · Buttons having the same functions as the buttons on your original remote control may have different namings on the SLE3400EN (e. g. Only functions that are available on your original remote control can be used for operating your devices with the SLE3400EN. · lights up red when the remote control is in setup mode. · lights up red when a remote control command is being sent. selects available source inputs (antenna, cable, etc. ). · The remote control is now in setup mode. Press digit buttons , , and , in that order. · After each button press the red Setup light blinks once. Press the button that you wish to reset twice. 2x · After each button press the red Setup light blinks once. · The red Setup light will blink one more time to confirm that the button was succesfully reset to its original function. EN 5sec. MyTVswitchesOFFinstep4butdoesnot switchONagaininstep5. Panasonic) only switch ON after a long press on one of the digit buttons. After a long button press in setup mode the remote control will start trying to improve the button (see chapter 2. 2. 2) instead of switching ON the TV. · In this case, switch ON the TV manually or use the original remote control for this. After successfully completing setup, the remote control will switch ON the TV with a long button press on one of the digit buttons, just as your original remote control. 10 EN 11 Usingtheuniversalremotecontrol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . switches the selected device on / off. 4. 1 Frequentlyaskedquestions In this chapter you will find answers to the most frequently asked questions about your universal remote control. English . . . . . . . . . . . . [. . . ] If, however, you require extra information or have additional questions about setup, usage, spare parts, warranty, etc. of the SLE3400EN, you can always contact us. When calling our helpline, make sure to have the SLE3400EN at hand when you call, so that our operators can help you determine whether the SLE3400EN is working properly. You will find our contact details at the end of this user manual. [. . . ]