User manual PHILIPS SPF3480T

[. . . ] No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of the company. The company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, the company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. Before operating the PhotoFrame, carefully read and follow the instructions below. [. . . ] To play back your own files, insert a compatible memory card or USB flash drive that contains supported files into the corresponding slot on the PhotoFrame as illustrated below. For more information about the supported file formats, refer to "Specifications" on page 52. Maximum capacity specifications listed above are subject to change without prior notice. In other words, you can change or remove the memory card when the power of the PhotoFrame is either turned on or turned off. However, when formatting your memory cards, use FAT16 and FAT32 file systems in Windows only. Formatting memory cards with NTFS or MAC is not supported. â· To use a microSD, a miniSD or a Memory Stick Micro (M2) card, a card adapter is required. Step 6: Copying photos to internal memory When inserting a memory card or a USB flash drive, you will be asked to copy all photos to the internal memory. If "Smart Copy" is set to "Resize" under "General Settings", photos will be resized to the screen resolution when copied to the internal memory to optimize the storage capacity. Please keep a copy of the original photos on your memory card or USB flash drive. To copy all photos contained in the inserted memory card (or USB flash drive), select the check mark and press to proceed. To view photos without copying them to the PhotoFrame, select the cross mark and press . The PhotoFrame will start playing back the photos automatically from the inserted memory card or USB flash drive. Do not remove the memory card/USB flash drive before the copy process is completed. â· If the files you wish to copy from the memory card/USB flash drive already exists in the internal memory of the PhotoFrame, the files will be overwritten when you select to proceed. You can connect the PhotoFrame to a computer using a mini USB cable (to be purchased separately) to easily manage the files in the internal memory of the PhotoFrame. Connect the other end of the USB cable to a USB port on the computer, making sure the connectors are fully inserted. Once connected, the PhotoFrame will enter PC transfer mode automatically. Now you can freely transfer the files in the PhotoFrame as you would on other disk drive. You can copy photos from the computer to the PhotoFrame, and vice versa. â· The files in the memory cards and USB flash drive cannot be viewed/edited via USB connection. Step 8: Replacing the paper mat Your PhotoFrame may come with one or more bonus paper mats depending on your purchased model. [. . . ] The DPF's Smart Cropping (ON by default) feature will automatically resize the file based on the unit's screen resolution and will significantly reduce the size of the photo and eliminate this issue. However, please always keep a copy of the original photos on the computer. The frame froze and will not respond, what can I do?If the frame freezes, it is easy to restart by unplugging from power, then press power button again. [. . . ]