User manual PHILIPS SPF4480X

[. . . ] No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of the company. The company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, The company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. Before operating the PhotoFrame, carefully read and follow the instructions below. [. . . ] Pull out the back stand and adjust accordingly to the preferred viewing angle. Step 2: Connecting to power Connect the power adapter as below (1), and press the Power button to turn on the PhotoFrame (2). To help you get the most out of your PhotoFrame, we installed a video tutorial that automatically starts playing when you first turn on your unit. To cancel the looping video and start playing your own photos, press any of the buttons on the back. Follow the fivestep process to familiarize yourself with how the control buttons work. This simple process is automatically disabled after the first use. You can turn on the tutorial by going into SETTINGS. Select a language and set the date and time during the first use of the PhotoFrame. To select a language you wish to use, and Select a year, and then press 3. To move to the Month field, press or To select a month, and then Step 5: Inserting a memory card/ USB flash drive english You can turn on the PhotoFrame and play back the pre-installed photos in the internal memory with no memory card/USB flash drive inserted. To play back your own files, insert a compatible memory card or USB flash drive that contains supported files into the corresponding slot on the PhotoFrame as illustrated below. For more information about the supported file formats, refer to "Specifications" on page 59. Step 6: Copying photos and/or music to the internal memory english When inserting a memory card or a USB flash drive, you will be asked to copy all photos and/or music to the internal memory. If "Smart Copy" is set to "Resize" under "General Settings", photos will be resized to the screen resolution when copied to the internal memory to optimize the storage capacity. Please keep a copy of the original photos on your memory card or USB flash drive. To copy all photos and/or music contained in the inserted memory card (or USB flash drive), select the check mark and press to proceed. To view photos without copying them to the PhotoFrame, select the cross mark and press . Start playing back the photos automatically from the inserted memory card or USB flash drive. Already exists in the internal memory of the PhotoFrame, the files will be overwritten when you select to proceed. You can connect the PhotoFrame to a computer using the mini USB cable (included) to easily manage the files in the internal memory of the PhotoFrame. Connect the other end of the USB cable to a USB port on the computer, making sure the connectors are fully inserted. Once connected, the PhotoFrame will enter PC transfer mode automatically. [. . . ] This is mainly due to extra processing time needed to decode very large size high resolution files. The DPF's Smart Cropping (ON by default) feature will automatically resize the file based on the unit's screen resolution and will significantly reduce the size of the photo and eliminate this issue. However, please always keep a copy of the original photos on the computer. The frame froze and will not respond, what can I do? [. . . ]