Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PHILIPS SQM5572. We hope that this PHILIPS SQM5572 user guide will be useful to you.
Lastmanuals help download the user guide PHILIPS SQM5572.
Detailed instructions for use are in the User's Guide.
[. . . ] Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. Designed to fit most brands of TV with a focus on safety and ease of use. [. . . ] A hammer can be used to lightly tap the anchors into place if necessary. Place the mount back against the wall and secure it using the lag bolts (Q) and lag bolt washers (R) provided. Do not over-tighten these bolts and do not release the mount until all bolts are in place. Once all (4) lag bolts are in place you must tighten each one. Determine the correct length of bolt to use with your display by first examining the back of your display. Ifyourdisplayhasaflatback: You will use one of the shorter bolts (A, D, G, or J) from the hardware kit. Ifyourdisplayhasacurvedor recessedback:You will use one of the longer bolts (B, E, H, or K) along with a spacer (M or N). Determine the correct diameter of bolt to use by carefully trying one bolt each from Bags 1 - 4 of the hardware kit. Do not force any of the bolts if you feel resistance stop immediately and try a smaller diameter bolt. Attach the arms to the back of your display using the bolts identified in Steps 1 and 2 along with the corresponding Lock Washer (C, F, I, or L). With the help of another person, carefully lift your display and place it on mount. Place the display in the middle of the mount, and do not release the display until the mounting arms have securely hooked onto the crossbars. A) If you are using the M4, M5, or M6 bolts (Bags 1, 2, and 3 respectively), you will also need to use the M6 Washers (O). B) If you are using one of the longer bolts on a display with a curved or recessed back, you will also use a spacer (M or N). [. . . ] Register your product and get support at www. 6 To adjust the tilt position of your display, have one person hold the display in place while another person loosens the two tilt adjustment knobs located on either side of the mount. Once the knobs are loose, move the display to the desired angle. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SQM5572
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SQM5572 will begin.
