Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PHILIPS SRU 3030. We hope that this PHILIPS SRU 3030 user guide will be useful to you.
Lastmanuals help download the user guide PHILIPS SRU 3030.
Detailed instructions for use are in the User's Guide.
[. . . ] If that is the case, the SRU 3030 does not recognize the brand and/or model of your TV and you need to program the remote control to do so. You can set the remote control either automatically or manually. Automatically setting the remote control The remote control will now automatically search for the right code for your device. 1 Make sure the TV is switched on and select a channel using the original remote control or the keys on the TV (for example channel 1). [. . . ] The SRU 3030 has now found a code that works on your TV. Check if you can operate all functions on your TV with the SRU 3030. If this is not the case, you can redo the automatic setting. The SRU 3030 will then search for a code that works better. After the SRU 3030 has run through all the known codes, the search will stop automatically and the LED will stop flashing. 2 Look up the brand of your TV in the code list at the back of this manual. One or more four-figure codes are shown for each brand. Com/urc you can directly select your device typenumber to find the right code. Keep keys 1 and 3 pressed simultaneously for three seconds until the LED flashes twice and then remains lit Then enter the code noted in step 2 using the digit keys. The LED will now flash twice and then remains lit. The code has now been stored in the memory of the SRU 3030. Replace the old batteries with two new 1. The TV does not respond but the LED does flash when a key is pressed. Point the SRU 3030 at the device and make sure that there are no obstructions between the SRU 3030 and the device. the SRU 3030 does not respond properly to commands. Try programming the RU 5010 again using another code, which is mentioned under the brand of your device, or reset for automatic search to find the right code. If the TV still does not respond, call our helpline. Find out whether your TV is equipped with Teletext. You have difficulties operating all of the functions on your device. Maybe the SRU 3030 has to be adapted to the model of the device. Your brand of device is not in the code list. None of the codes works during manual setting of the remote control. [. . . ] Read this manual carefully before you make a call. You can solve most of the problems yourself. If you cannot find any answers to your problems, write down the details of your device shown in the code list at the back of this manual. This will help our operators to assist you better and more quickly. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SRU 3030
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SRU 3030 will begin.
