User manual PHILIPS SRU5030

[. . . ] Example of TV: 1 Turn your TV on manually or use the original remote control. ­ If the key does not light up, check whether the batteries are properly inserted (see `Inserting the batteries'). For an overview of the keys and their functions see `3. If the TV responds as it should to all of the key commands the SRU 5030 is ready for use. [. . . ] If the device does not respond at all, or not to all of the key commands, start again from step 2 and try the next code from the list. The illustration on page 3 gives an overview of all keys and their functions. Switches between external inputs of your equipment. Direct choice of channels and other functions. When pressed at the same time as a second key, the second key will get another function. All blue labelled keys can be used together with SHIFT. Stores TV settings Try out other combinations with the SHIFT-key on your device in order to find out which functions are available. Only functions featured on the original remote control are available. - blue teletext key - wind (VCR/DVD) 9 . - green teletext key - stop (VCR/DVD) 0 . - yellow teletext key - pause (VCR/DVD) Jumps back one level in the menu or turns off the menu. If you use the (fi) 'memory off' key to get to the next teletext page on your Philips TV, you can press the Subtitle key for this. If the device does not respond at all, or not to all of the key commands, follow the instructions under `Setting the remote control'. It is possible that you must enter another code for the device. You can select the device you wish to operate with the TV, DVD and VCR keys. each key allows operation of one device only. If desired, you can program the keys to select a different kind of device. For example, if you want to operate a second TV. In the following example you will see how to configure the DVD key for a second TV. Then keep keys 1 and 6 on the SRU 5030 pressed simultaneously for three seconds, until the DVD key lights up. [. . . ] When you call our helpline, make sure the device is to hand so that our operators can help you determine whether your remote control is working properly. The model number of your Philips universal remote control is SRU 5030/86. OBS: Om lägesknapparna (TV, DVD och VCR) blink four times after every key press, angiver fjernbetjeningen, at dens batterier er ved at blive opbrugte. Om du vill lägga till en funktion till SRU 5030, kan du ringa Philips servicetelefon för universalfjärrkontroller och be om den 5-siffriga koden för extrafunktionen. [. . . ]