User manual PHILIPS SRU5110

[. . . ] 2 For an overview of the keys and their functions see `3. If the TV responds as it should to all of the key commands the SRU 5110 is ready for use. Tip If the TV does not respond at all or not to all of the key commands, follow the instructions under `2. 3 Setting the remote control This is only necessary if your TV does not respond to the SRU 5110. [. . . ] Full search setup If your code does not work or if the brand of your device is not mentioned in the code list, you can try setting the remote control with full search setup. Press the SET UP key until the LED flashes twice and then remains lit. Press and hold the Standby key of the SRU 5110 until your TV switches off (standby). The SRU 5110 is now set to operate your TV. Full search setup takes about 5 minutes. Used in text mode and in some on-screen menus. Direct choice of channels and other functions. Switches between external inputs of your equipment. The illustration on page 2 gives an overview of all keys and their functions. 3 4 5 6 7 8 9 10 6 MENU Cursor keys INFO s - VOL + Numeric keys A/V Note If the device does not respond at all, or not to all of the key commands, follow the instructions under `2. Restoring the original functions of your remote control 1 Keep keys 1 and 6 on the SRU 5110 pressed simultaneously for three seconds, until the LED flashes twice and then remains lit. All original functions have now been restored and any extra functions have been deleted. Jumps back one level in the menu or turns off the menu. Lights up when a remote control command is sent. In this chapter you find answers to the most frequently asked questions about your universal remote control. The TV does not respond and the LED key does not flash when I press a key. Replace the old batteries with two new AAA batteries. The TV does not respond but the SET UP key does flash when a key is pressed. Point the SRU 5110 at the TV and make sure that there are no obstructions between the SRU 5110 and the TV. If the TV still does not respond, call our helpline. [. . . ] Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 1902/96/EC. please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. [. . . ]