User manual PHILIPS US2-PH0900L

[. . . ] ⷠFollow all warnings and instructions marked on the system and in this guide. ⷠUnplug this equipment from the wall outlet before cleaning. (A cloth dampened with rubbing alcohol or window cleaner works well. ) · Do not use this equipment near water; for example, near a bath tub, washbowl, kitchen sink or laundry tub, in a wet basement, or in or near a swimming pool. [. . . ] As soon as it recognizes the base unit, the indicator light will then illuminate green. The indicator light on the base unit will illuminate green as well, just after it has recognized the extension unit. Your wireless phone jack is now ready for use. Plug one end of a phone cord into the single phone jack on the right side of the extension unit. Plug the other end of a phone cord into the phone jack on the back of the satellite receiver. Look for a green indicator light on the front of the extension unit. if indicator light remains red , refer to the Troubleshooting section. Telephone Follow these steps to connect a telephone to the Philips Wireless Phone Jack extension unit: 1. Locate an existing electrical outlet near the prospective location for your phone. Plug the cord from your phone into the single phone jack on the extension unit. Look for a green indicator light on the front of the extension unit. Plug one end of a phone cord into the single phone jack on the right side of the extension unit. Plug the other end of a phone cord into the phone jack on the fax machine. Look for a green indicator light on the front of the extension unit. VoIP Phone Connection Follow these steps to extend your VoIP phone service to any electrical outlet in your home using a Philips Wireless Phone Jack for Voice/Data extension unit: 1. Locate an existing electrical outlet near your VoIP telephone adaptor. Plug one end of a phone cord into the phone jack on the right side of the base unit labeled LINE. Look for a solid red indicator light on the base unit. Plug the other end of a phone cord into one of the phone jacks on your VoIP telephone adaptor. Plug the extension unit into an A/C outlet where you desire a phone connection. Connect the phone to the single phone connector on the right side of the extension unit. Look for a green light on the front of the extension unit. [. . . ] Extension is too far from the base unit. Relocate either the base or extension unit to another electrical outlet. If indicator light on extension unit remains solid red, reprogram the link code on extension unit (see Troubleshooting. Base unit's indi- Either the extension unit has not been installed or it cannot communicate with the base cator light is solid unit. [. . . ]