User manual PHOTOSONIX NOVA PRO

[. . . ] Do, please take extra care to read about the warnings inside the front cover, the warnings are there as important information, seriously aimed at informing and protecting you and your loved ones. www. photosonix. com To set up Step1. Connect the glasses into the LIGHT jack and the headphones into the SOUND jack. To play a session Step 1. Turn the Nova Pro 100 unit on: press the ON switch on the left side of the unit. Press the SELECT switch to cycle thru the session categories. [. . . ] Your personal preferences will be recorded, and will come up whenever the system is turned on. User tip: We often receive calls from customers asking if the built in sessions can be changed via the PPP setting. The answer to that is no, this is what Light & Sound Designer and the downloading capability are for. Rest assured, you can not change or damage the built in sessions. Session Choices, Relax: TIME TONE FREQ1 FREQ2 PITCH1 PITCH2 DUTY/PHASE OPTIONS RELAX MEDITATE SLEEP LEARN ENERGIZE VISUALIZE ENTERTAINMENT SPECIAL DISPLAY SESSIONS FUNCTIONS 1. Relax Break 15 min, pulsed surf, 5-21 Hz Beginning at 21 Hertz and ramping to Theta over 3 minutes, remaining in Theta for 9 minutes, then returning to refreshed and energized awareness. Relax and Back 46 min, dual binaural beats 3-14 Hz This session begins at 16 Hertz and ramps into the Alpha/Theta range for light to medium relaxation, then on down to Delta for deep relaxation. It ends with a return to relaxed alertness. Power Relaxation 15 min, dual binaural beats 10-11 Hz This is relaxation for the physical body. Use after a workout or strenuous physical activity. Stress Killer 36 min, dual binaural beats/surf 2-11 Hz A combination of pleasing tones and alpha/theta relaxation for for relief from the feeling of being stressed out or emotionally upset. Gates of Calmness 27 min, mixed, 3. 5-12 Hz Classic Alpha/Theta relaxation in alternating modes. Times below 1 hour are displayed in minutes (01 to 59) and above that in hours and minutes (1. 17 is 1hr 17 minutes). Manual mode oPc (operator controlled session) In the oPc session you have manual control of stimulation parameters. This section shows you how to control the manual mode and in the process introduces you to the stimulation options. Plug in the headphones and light frames, put on the headphones, and lay the light frames near the system with the lights up so you can see them. Make each of the selections in turn, look and listen to understand what you are controlling and what you like. To reach oPc press the DOWN key from P01. The system will start the 10 second countdown and play the oPc default settings. During the countdown if you press the SELECT key you will be able to change the time of the oPc session by using the UP and DOWN keys to scroll through the choices and make a selection. The run time of an operator controlled session can be adjusted from 15 minutes to 1 hour (the default time is 30 minutes). Wait for the count down and press SELECT. The display moves to FREQUENCY 1 and displays 7. 81. Press UP and DOWN from 0. 25 to 42 hertz. [. . . ] Make an effort to stretch your imagination during this session. Quick Inspiration 16 min, pulsed chord, 4. 5-12 Hz A microloop with 4 second stepped changes moves thru the alpha and theta ranges to encourage a mood of relaxed creativity. Active Visualization 31 min, dual binaural beats, 4-12 Hz Dual binaural beat sounds with offset frequency and pitch ramps in a constant alpha/ theta stimulation range. Mental Image Development 22 min, pulsed tone, 4. 5-42 Hz A pulsed tone variation of session C06, for variety and different tastes. [. . . ]