User manual PINNACLE MCE REMOTE QUICK GUIDE

[. . . ] M Getting Started Remote Control and Receiver for Media Center PC with Windows® For distribution only with a new computer Welcome Congratulations on your purchase of the Remote Control and Receiver for Media Center PC with Windows®. The remote control and infrared (IR) receiver (also known as a remote sensor) let you access and manage your Media Center PC and other peripheral devices. Insert the Batteries The remote control uses two AA (LR6) batteries, which are included in the package. Whenever you insert batteries, always make sure both of them are new. To insert the batteries 1 Remove the battery compartment cover by pressing on its release and lifting up. [. . . ] To access teletext pages · Enter the three-digit number of the page you want to display by using the numeric keypad. For example, enter 300 to access the A-Z Teletext Index. To navigate between teletext pages · Press the UP and DOWN buttons on your remote control to navigate between Next and Previous pages. To use the Fastext buttons · The red, green, yellow, and blue buttons on your remote control correspond to the same colored buttons on your TV. Press a colored button on your remote control to go to a preset page. For example, on page 100, press the green button on the remote control to go to the New Zealand News Index, or Page 102. 6 Using the Remote Control Learning Functionality The TV, VOL +, and VOL ­ buttons on the remote control for Media Center PC can "learn" IR commands from other remote controls. This feature lets you use the TV button to turn on your TV and the VOL + and VOL - buttons to adjust the volume on your TV or another device, such as an audio receiver. Notes · By default, the VOL + and VOL - buttons on the remote control for Media Center PC control the system volume on your computer, and the TV button has no command assigned to it until it "learns" one. · Do not perform this procedure in bright natural or artificial light. To program buttons on the remote control by using the learning feature 1 Place the remote control for Media Center PC head to head (2 to 3 inches apart) with the remote control from which it is learning. 2 On the remote control for Media Center PC, press and hold the DVD MENU and OK buttons at the same time until the remote control lights turn off (2 seconds). The remote is now in learning setup mode. 3 On the remote control for Media Center PC, press and release the TV, VOL +, or VOL ­ button, depending on which command you want it to learn. The remote control for Media Center PC lights blink once to confirm the selection. 4 On the remote control that is teaching the command, press and hold the button that you want the corresponding button on the remote control for Media Center PC to learn. The remote control for Media Center PC lights blink twice to confirm the selection. If the remote did not learn the command, the lights blink quickly four times. 5 Repeat steps 1 through 4 for the other buttons that can learn commands. To restore the default remote control settings 1 Press and hold the DVD MENU button and LEFT navigation button at the same time until the remote control for Media Center PC lights turn off. The remote control for Media Center PC lights blink twice to confirm that the buttons have been reset. The TV button will have no command assigned to it and the VOL + and VOL ­ buttons will adjust the Media Center PC system volume. If the default settings were not restored, the lights blink quickly four times. [. . . ] Manufacturer shall not be liable for any loss or damage that you could have reasonably avoided, for example, by backing up your software and files regularly. YOU AGREE THAT THIS GUARANTEE IS YOUR SOLE GUARANTEE IN RELATION TO THE HARDWARE. MANUFACTURER AND ITS SUPPLIERS MAKE NO OTHER GUARANTEES OR WARRANTIES WITH RESPECT TO THE HARDWARE AND ANY PRODUCT MANUAL(S) OR OTHER WRITTEN MATERIALS THAT ACCOMPANY THE HARDWARE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW AND SUBJECT TO THIS GUARANTEE, MANUFACTURER AND ITS SUPPLIERS DISCLAIM ALL WARRANTIES, CONDITIONS AND OTHER TERMS, EITHER EXPRESS OR IMPLIED (WHETHER BY STATUTE, COMMON LAW, COLLATERALLY OR OTHERWISE), INCLUDING BUT NOT LIMITED TO ANY (IF ANY) IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR PARTICULAR PURPOSE, LACK OF VIRUSES, LACK OF NEGLIGENCE, LACK OF WORKMANLIKE EFFORT, TITLE, AUTHORITY, OR NONINFRINGEMENT WITH RESPECT TO THE HARDWARE AND THE PRODUCT MANUAL(S) OR OTHER WRITTEN MATERIALS THAT ACCOMPANY THE HARDWARE. [. . . ]