User manual PIONEER AVD-W1100V

[. . . ] This product conforms to new cord colors. 27 Connecting with Pioneer Head Unit with Component Cable . Read this manual fully and carefully before operating your display. Keep this manual handy for future reference. [. . . ] The settings of [BRIGHT] and [CONTRAST] are stored separately for light ambient (daytime) and dark ambient (nighttime). A red mark ( ) or blue mark ( ) is displayed to the right of [BRIGHT] and [CONTRAST] on the screen, respectively, as the ambient light sensor determines brightness or darkness. If you do nothing for about 30 seconds after displaying the picture adjust menu, the menu screen will disappear. Widens the gap between black and white (brighten). Viewing can become difficult after extended video viewing if the screen is too bright at night or when the ambient brightness becomes dark. This device automatically adjusts the brightness of the LCD screen in accordance with the ambient brightness (3-point intelligent dimmer). Follow step 1 and step 2 in the "Picture Adjustment (BRIGHT/CONTRAST/COLOR/HUE)". The external light sensor of the monitor screen senses the ambient brightness and changes the color, shape and position of the mark according to the current brightness (external light level). Yellow: bright (day time) Red: intermediate brightness (evening) Blue: dark (night time) The external light level used as the standard for adjusting [DIMMER] is indicated by the mark shown in step 2 and its position. The marks indicating the current ambient brightness used for adjusting [BRIGHT] and [CONTRAST] may differ slightly. The more the yellow mark extends to the right, the brighter the screen appears. With this screen, the brightness setting of the screen can be adjusted when it is dark ( ). This level indicates the brightness of the screen being adjusted. The external light level can be adjusted to Dark, Intermediate or Bright and the setting saved. Press and hold the WIDE/MENU button for 2 seconds or longer to close the menu and complete the setting. If you do nothing for about 30 seconds after displaying the picture adjust menu, the menu screen will disappear. Video formats such as NTSC, PAL, and SECAM can be selected depending on the format of the AV equipment connected to this unit. Each press of the VOL+ button selects the item in the following order: [AUTO] = [NTSC] = [PAL] = [SECAM] = Exit to [AUTO] Press and hold the WIDE/MENU button for 2 seconds or longer to close the menu and complete the setting. Broadcast reception may be inferior when [AUTO] is selected. If you do nothing for about 30 seconds after displaying the setup menu, the menu screen will disappear. When connecting with a head unit which has Power Control function, such as the AVHP7800DVD, you can turn the AVD-W1100V ON or OFF through the head unit. Follow step 1 and step 2 in the "Input Setting (VCR1/VCR2)". [. . . ] Do not install the display in a place where it will impair the performance of any of the vehicle's operating systems, including airbags and headrests. Make sure there is nothing behind the panels when drilling holes in them. Be careful not to damage fuel lines, brake lines or power cables. When using screws, do not allow them to come into contact with any electrical lead. [. . . ]