User manual PIONEER AVD-W9000

[. . . ] Thank you for purchasing this PIONEER product. Please read through this manual before using the product for the first time, to ensure proper use. After reading, please keep the manual in a safe and accessible place for future reference. ­ Connecting the power cable 15 ­ Connecting with RCA cables 16 ­ Connecting with component cables 17 Installation 18 ­ Installing the hide-away unit 18 Additional Information Using the display correctly 19 ­ Handling the display 19 ­ Liquid crystal display (LCD) screen 19 ­ Keeping the display in good condition 19 ­ LED (light-emitting diode) backlight 19 Specifications 21 Precautions IMPORTANT SAFEGUARDS 3 To ensure safe driving 3 ­ When using a display connected to COMPONENT OUT (component output) or VCR OUT (VCR output) 4 To avoid battery exhaustion 4 Before You Start About this unit 5 Visit our website 5 In case of trouble 5 To protect the LCD screen 5 For viewing the LCD comfortably 5 ­ Changing the wide screen size 5 ­ Changing the picture adjustment 5 Installing and removing the display unit 5 ­ Installing the display unit 6 ­ Removing the display unit 7 Resetting the microprocessor 7 Operating this unit What's What 8 ­ Display unit 8 Basic Operations 9 ­ Power ON/OFF 9 ­ Selecting a source 9 ­ Adjusting the volume 9 ­ Changing the wide screen mode 9 Changing the picture adjustment 10 ­ Adjusting the dimmer 11 Setup 11 ­ Setting the component video 11 ­ Selecting the video format 12 ­ Setting the power control function 12 Connection and installation Parts supplied 13 Connections 14 Please read all of these instructions regarding your display and retain them for future reference. [. . . ] Press WIDE/MENU repeatedly to switch between the following settings: AUTO (auto)--FULL (full)--JUST (just)-- CINEMA (cinema)--ZOOM (zoom)-- NORMAL (normal) # You can select AUTO only when selecting VCR1 [COMPONENT] as the source. aUTO (auto) When wide mode information is included in the video signal , the wide mode adjusts automatically according to the information. FULL (full) A 4:3 picture is enlarged in the horizontal direction only, giving you a 4:3 TV picture (normal picture) without any omissions. You can select a source you want to listen to. Press SRC/POWER repeatedly to switch between the following sources. This unit is equipped with two video inputs, VCR1 IN (VCR1 input) and VCR2 IN (VCR2 input). JUST (just) The picture is enlarged slightly at the center and the amount of enlargement increases horizontally to the ends, enabling you to enjoy a 4:3 picture without sensing any disparity even on a wide screen. CINEMA (cinema) The picture is enlarged by the same proportion as FULL or ZOOM in the horizontal direction and by an intermediate proportion between FULL and ZOOM in the vertical direction; ideal for a cinema-sized picture (wide screen picture) where captions lie outside. ZOOM (zoom) A 4:3 picture is enlarged in the same proportion both vertically and horizontally; ideal for a cinema-sized picture (wide screen picture). NORMAL (normal) A 4:3 picture is displayed as it is, giving you no sense of disparity since its proportions are the same as that of the normal picture. Different settings can be memorized for each video source. When video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear different. Remember that using the wide mode feature of this system for commercial or public viewing purposes may constitute an infringement on the author's rights protected by the Copyright Law. You can adjust the BRIGHTNESS (brightness), CONTRAST (contrast), COLOR (color) and HUE (hue) for each source. CONTRAST are stored separately for light ambient (daytime) and dark ambient (nighttime) conditions. A sun or moon is displayed next to BRIGHTNESS and CONTRAST, respectively, as the ambient light sensor determines brightness or darkness. You can adjust the HUE only for NTSC video. When VCR1 [COMPONENT] is selected as the source, you cannot adjust the HUE. Press WIDE/MENU repeatedly to switch between the following adjustment functions: BRIGHTNESS (brightness)--CONTRAST (contrast)--COLOR (color)--HUE (hue)-- COLOR TEMP (color temperature)-- A. cONTRAST (active contrast)--DIMMER (dimmer) 3 Press VOL DOWN or VOL UP to adjust the selected item. Each time VOL DOWN or VOL UP is pressed, the level of selected item is increased or decreased. CONTRAST ­ Automatically sets the most suitable contrast for the scene # You can select ON or OFF, when A. [. . . ] If you notice smoke, a strange noise or smell, or any other abnormal signs from the display, turn off the power immediately and consult your dealer or the nearest authorized PIONEER Service Station. Using this unit in this condition may result in permanent damage to the system. Do not disassemble or modify this unit, as there are high-voltage components inside which may cause electric shock. Be sure to consult your dealer or the nearest authorized PIONEER Service Station for internal inspection, adjustments, or repairs. [. . . ]