User manual PIONEER AVH-P7500DVDII

[. . . ] Make sure that wires will not interfere with moving parts of the vehicle, such as the gearshift, parking brake or seat sliding mechanism. If you do, the protection circuit may fail to work properly. Do not install the display where it may (i) obstruct the driver's vision, (ii) impair the performance of any of the vehicle's operating systems or safety features, including air bags, hazard lamp buttons or (iii) impair the driver's ability to safely operate the vehicle. To avoid the risk of accident and the potential violation of applicable laws, the front DVD or TV (sold separately) feature should never be used while the vehicle is being driven. [. . . ] IP-BUS cable Black IP-BUS cable (supplied with TV tuner) Blue Multi-CD player (sold separately) Fuse holder Yellow To terminal always supplied with power regardless of ignition switch position. In this case, be sure to connect 2* to 5* and 4* to 3*. Cap (1*) When not using this terminal, do not remove the cap. Yellow (2*) To terminal always supplied with power regardless of ignition switch position. Blue/white (6*) ISO connector Note: In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors. In another type of vehicle, never connect 6* and 7*. Speaker leads White: Front left + White/black: Front left Gray: Front right + Gray/black: Front right Green: Rear left + Green/black: Rear left Violet: Rear right + Violet/black: Rear right See the section "When connecting with a rear view camera". Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. This lead must be connected to the power supply side of the parking brake switch. When connecting to separately sold power amp Perform these connections when using the optional amplifier. When connecting with a rear view camera When using this product with a rear view camera, automatic switching to video from a rear view camera when the gear shift is moved to REVERSE (R) position is possible. The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. Do not use this function for entertainment purposes. The object in rear view may appear closer or more distant than in reality. Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise screen image may appear reversed. Violet/white Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position. It is necessary to set to BACK UP CAMERA in SETUP when connecting the rear view camera. It is necessary to set to AV INPUT in SETUP when connecting the external video component. This product's rear video output is for connection of a display to enable passengers in the rear seats to watch the DVD or Video CD. NEVER install the display in a location that enables the Driver to watch the DVD or Video CD while Driving. [. . . ] When installing in a shallow space, use the following screw holes. In this case, stick conceal tape on parts that protrude from the dashboard. If you do not operate the removing and attaching the front panel function, use the supplied fixing screws to fix the front panel to this unit. Fix the front panel to the unit using fixing screws after removing the front panel. [. . . ]