User manual PIONEER AVH-P7900DVD INSTALLATION MANUAL

[. . . ] 11 When connecting with a rear view camera . 13 When connecting the external video component and the display . 15 Connecting the Units CAUTION: • PIONEER does not recommend that you install or service your display yourself. Installing or servicing the product may expose you to risk of electric shock or other hazards. [. . . ] connect 6* and 7* when Pin 5 is an antenna control type. In other types of vehicles, never connect 6* and 7*. 5 This product Power supply box (supplied) English Yellow/black If you use equipment with Mute function, wire this lead to the Audio Mute lead on that piece of equipment. If not, keep the Audio Mute lead free of any connections. Fuse resistor Nederlands Speaker leads See the section “Connecting the power cord (2)”. 3 6 Connecting the Units Connecting the power cord (2) WARNING: • If this unit is used with more than a 6-ch speaker system, be sure to connect the yellow lead to the battery terminal directly. (See the section “Connecting the power cord (1)”). Note: Depending on the kind of vehicle, the function of 3* and 5* may be different. In this case, be sure to connect 2* to 5* and 4* to 3*. Connect leads of the same color to each other. Cap (1*) When not using this terminal, do not remove the cap. ISO connector Note: In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors. The pin position of the ISO connector will differ depending on the type of vehicle. connect 6* and 7* when Pin 5 is an antenna control type. In other types of vehicles, never connect 6* and 7*. 7 English This product Power supply box (supplied) Español Yellow/black If you use equipment with Mute function, wire this lead to the Audio Mute lead on that piece of equipment. If not, keep the Audio Mute lead free of any connections. Fuse resistor Fuse resistor Extension leads (6 m) (supplied) White White/black Gray Gray/black Green Green/black Violet Violet/black White: MID/FRONT OUTPUT Front left + Speaker leads Italiano White/black: Front left ≠ Gray: Gray/black: Green: Front right + Front right ≠ Rear left + Nederlands Green/black: Rear left ≠ Violet: Rear right + Violet/black: Rear right ≠ PyÒÒÍËÈ Connect in the case of audio output from car speakers using the ISO connector. To hide-away unit See the section “Connecting the power cord (3)”. 4 8 Connecting the Units Connecting the power cord (3) If this unit is used with more than a 6-ch speaker system, be sure to connect the yellow lead to the battery terminal directly. Hide-away unit (supplied) Connect when the audio settings of this product are used in the network mode. [. . . ] 11 17 Installing the hide-away unit Mounting with Brackets Before installing the unit • Remove the mounting sleeve. 15) Loosen the screws (2 mm × 3 mm) and then remove the mounting sleeve. 13 Mounting with Hook and Loop Fastner Thoroughly wipe off the surface before affixing the hook and loop fastner. Hide-away unit Hook and loop fastner (large) (hard) Hook and loop fastner (large) (soft) Installation with the rubber bush 1. [. . . ]