User manual PIONEER AVIC-F500BT

[. . . ] While updating of the program is in progress, ensure that the power supply of the Navigation System is not turned off. · When program updating is completed, the Navigation System will be re-booted. After the system has booted up, make sure not to turn off the power supply for the Navigation System until the map of your surroundings appears. · In the worst possible case, there is the risk of data in the Address Book being lost. [. . . ] 1 Select "Information" in the Main menu, then select "Location Status" and "Connection Status". Either "OK" or "No good" appears on the screen, and connection status of each cable is shown. 1 2 3 4 5 6 7 Chapter 4 Utilising Various Information 87 1. Speed Pulse The number of the Speed Pulse detected by this unit is shown. "0" is shown while the vehicle is stationary. GPS Aerial The connection status of GPS aerial and the sensitivity are shown. If "No good" is displayed, check the connection status of GPS aerial. Installation Position The Installation position of the main unit is shown. If "No good" is displayed, refer to "Installation Manual" for the installation position. Hand brake When the handbrake is applied, "On" is displayed. When the handbrake is released, "Off" is displayed. Keep the foot brake on while checking that the parking brake connection works properly. Settings marked with an asterisk (*) show that they are default or `factory' settings. For PC card menu, see "Using a PC Card" on page 77. Background Picture menu is described in "Changing Background Picture" on page 82. sRoute Guidance menu Auto Reroute This setting controls whether, when you stray from the guided route, the system automatically recalculates the route to your destination. On* : Auto Reroute function is turned on. Off : Auto Reroute function is turned off. Areas to Avoid Setting or change of Areas to Avoid is performed (see "Setting Areas to Avoid" on page 70). Route No. This setting controls whether, during a route calculation, the system calculates one route only, or whether it calculates several route options, one of which you select. 1*: Route options are not shown, and only one route judged as being optimum by your Navigation System is calculated. Multiple Routes : Several route options are calculated (maximum 6 routes). Fastest/Shortest This setting controls conditions for calculating a route. Shortest : Calculate a route with the shortest distance to your destination as a priority. Fastest* : Calculate a route with the shortest travel time to your destination as a priority. Avoid Motorway This setting controls conditions for calculating a route. (A route using motorway may be calculated in some cases, such as when setting your destination far away. ) On : Calculate a route that avoids motorways. Off* : Calculate a route that may include motorways. Avoid Ferry This setting controls conditions for calculating a route. On : Calculate a route that avoids ferries. [. . . ] Sweden: Based upon electronic data © National Land Survey Sweden. Switzerland: Topografische Grundlage: © Bundesamt für Landestopographie. Norway: Copyright © 2000 Norwegian Mapping Agency © 2002 DENSO CORPORATION, All rights reserved © 2001 Lernout & Hauspie Speech Products N. All rights reserved This product includes mapping data licenced from Ordnance Survey® with the permission of the Controller of Her Majesty's Stationery Office. [. . . ]