User manual PIONEER AVIC-X1

[. . . ] Operation Manual ENGLISH DVD AV NAVIGATION HEAD-UNIT AVIC-X1 The screen shown in the example may differ from the actual screen. The actual screen may be changed without notice for performance and function improvements. CRB1903B_ENGLISH. book Page 1 Friday, April 30, 2004 9:27 PM Introduction Licence Agreement PIONEER AVIC-X1 THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER CORP. (JAPAN) ("PIONEER"). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. [. . . ] If you do not use the touch panel keys for 30 seconds, they will be hidden automatically. Storing and recalling broadcast stations If you touch any of the preset tuning keys P1 (PRESET 1) -- P6 (PRESET 6) you can easily store up to six broadcast stations for later recall with the touch of a key. 4 RADIO Preset tuning keys (P1 -- P6) Chapter 6 1 5 Using the AV Source (Built-in DVD drive and Radio) When you find a frequency that you want to store in memory keep touching a preset tuning key P1 -- P6 until the preset number (e. g. , P. ch: 1) stops flashing. The number you have touched will flash in the preset number indicator and then remain lit. The selected radio station has been stored in memory. The next time you touch the same preset tuning key P1 -- P6 the radio station is recalled from memory. When the touch panel keys are not displayed, you can display them by touching the screen. When P1 -- P6 are not displayed, you can display them by touching DISP. Up to 18 FM stations, 6 for each of the three FM bands, and 6 MW/LW stations can be stored in memory. You can also use and to recall radio station assigned to preset tuning keys P1 -- P6. 2 Advanced radio operation (1) (1) Function display Shows the function names. 66 CRB1903B_ENGLISH. book Page 67 Friday, April 30, 2004 9:27 PM Tuning in strong signals Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. RDS AV RDS operation 1 2 3 Touch "LOCAL" in the FUNCTION menu. Touch "LOCAL" to turn local seek tuning on. To turn local seek tuning off, touch "LOCAL". There are four levels of sensitivity for FM and two levels for MW/LW: FM: 1 -- 2 -- 3 -- 4 MW/LW: 1 -- 2 The 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. (1) RDS Chapter 6 Storing the strongest broadcast frequencies BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning keys P1 -- P6 and once stored there you can tune in to those frequencies with the touch of a key. (4) (2) (3) 1 2 RDS (radio data system) is a system for providing information along with FM broadcasts. This inaudible information provides such features as program service name, program type, traffic announcement standby and automatic tuning, intended to aid radio listeners in finding and tuning in to a desired station. Pressing the DISP button changes the screen display. Switching screen display Page 92 (1) Preset list display Shows the name of broadcast program. If the program service name cannot be received, the frequency will be displayed instead. (2) NEWS indicator Shows when the set news program is received. (3) TRFC indicator Shows when a TP station is tuned in. (4) TEXT indicator Shows when the radio text is received. How to display the FUNCTION menu Page 57 RDS service may not be provided by all stations. RDS functions like AF and TA are only active when your radio is tuned to an RDS station. 67 Using the AV Source (Built-in DVD drive and Radio) Touch "BSM" in the FUNCTION menu. [. . . ] 34 Appendix Information Route Profile Overlay POI Connection Status RDS-TMC Route Scroll Read From Disc 3D Calibration Status Manual Station Search P. 47 115 CRB1903B_ENGLISH. book Page 116 Friday, April 30, 2004 9:27 PM NAVI/AV Settings Return Home Go to Set Memory Area Average Speed Hardware Volume Demo Mode Day/Night Display Map Display Background Picture Setting Language Selection Mute Setting Time P. 54 Tracking Display Close-up of Junction AV Guide Mode Arrow in AV P. 54 Appendix Modify Current Location KM Mile Setting Auto Voice Recognition Voice Recog. Help 116 CRB1903B_ENGLISH. book Page 117 Friday, April 30, 2004 9:27 PM Shortcut menu NAVI/AV Shortcut menu :Destination :Chg. Route :Registration :Area Search :Overlay POI P. [. . . ]