User manual PIONEER AVM-P9000

[. . . ] Multi-Channel AV Master Unit ENGLISH Before Using This Product Owner's Manual AVM-P9000 This product conforms to new cord colors. Contents Before Using This Product . . . . . . . . . . . . . . . . . . 3 Key Finder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About This Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 · Video System of a Connected Component · Output Setting of the DVD Player Multi-DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When used in conjunction with the Cabin EQ and SFC, the feature will make the sound image more natural and offer a panoramic sound that envelops you. 1. Select "Position Selector" by moving the joystick. "Position Selector" is highlighted in green. 2. Click the joystick. The Audio Setting Menu appears, with "Position" highlighted in green. 3. Click the joystick again. Each click changes listening position in the following order: Front Left = Front Right = Front Left & Right = Rear Left = Rear Right = Rear Left & Right = All Seats = Off Note: · For Time Alignment to be made, you need to have set the listening position to either of the Front Left or Right, or of the Rear Left or Right. Balance Adjustment This function allows you to select a Fader/Balance setting that provides ideal listening conditions in all occupied seats. 1. Select "FAD/BAL" by moving the joystick. "FAD/BAL" is highlighted in green. 2. Click the joystick. The Audio Setting Menu appears, with "FAD/BAL" highlighted in green. 3. Click the joystick. The FAD/BAL Setting Menu appears. 4. Adjust speaker balance by moving the joystick. The display shows "F 15" ­ "R 15" as it moves from front to rear. The display shows "L 09" ­ "R 09" as it moves from left to right. 5. Cancel the FAD/BAL Setting Menu by clicking the joystick. Note: · "F 00" is the proper setting when 2 speakers are in use. Adjustments for Speaker You need to make "with/without" (or yes/no) and "size" (bass reproducing capacity) selection/adjustments depending on the installed speakers. The size needs to be set to Large if the speaker is capable of reproducing sounds of about 100 Hz or below. Select "SP Setting" by moving the joystick. "SP Setting" is highlighted in green. 2. Click the joystick. The Speaker Setting Menu appears. The Front Left speaker is highlighted in green and in the lower right-hand corner of the screen the current settings of that speaker is shown. Operation at the Speaker Setting Menu Center Front Left Front Right Rear Left Rear Right Adjusting Audio (Basic) Sub Woofer Show the current settings of the selected speaker · To select a speaker, move the joystick up/down and left/right. Test Tone: See "Adjusting the Speakers' Output Levels using a Test Tone" (p. Cross Over: See "Selecting a Crossover Frequency" (p. SW Phase: See "Correcting the Subwoofer's Phase" (p. Audio Setting: Select this to go to the Audio Setting Menu. Return: Completes operations at the Speaker Setting Menu, bringing you back to the previous screen. Continued overleaf. 50 3. Select the speaker you want to make adjustments to by moving the joystick. The currently selected speaker is highlighted in green. Adjusting Audio (Basic) 51 4. Click the joystick. and are displayed and you can set the size and the level for the selected speaker. 5. Select the correct size for the selected speaker in use by moving the joystick left/right. Select the speaker settings as follows: Size Level Speakers Front (Left & Right) Rear (Left & Right) Center Sub Woofer Setting SMALL/LARGE OFF/SMALL/LARGE OFF/SMALL/LARGE OFF/ON Note: · The Front Left and Right speakers cannot be set differently. [. . . ] 4 (4 ­ 8 allowable) Preout maximum output level/output impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Linear PCM/Dolby Digital/Dolby Pro Logic/DTS Equalizer (3-Band Parametric Equalizer) (Low) . . . . . . . . . . . . . . . . . . . . . . Frequency: 40/80/100/160 Hz (Mid) . . . . . . . . . . . . . . . . . . . . . . . . Frequency: 200/500/1k/2k Hz (High) . . . . . . . . . . . . . . Frequency: 3. 15k/8k/10k/12. 5k Hz Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]