User manual PIONEER BDP-51FD

[. . . ] Operating Instructions Blu-ray Disc PLAYER Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Operate using the buttons on the player's front panel. Note · After restoring all the settings to the factory default settings, use Setup Navigator to reset the player (page 19). Initial Setup BD PLAYER Video Out Audio Out Speakers HDMI Language Parental Lock Options Setup Navigator Output Terminal Priority Video Audio S-Video/Video Analog Audio · HDMI ­ HDMI OUT terminal · Component Video ­ COMPONENT VIDEO output terminals · S-Video/Video ­ S-VIDEO output terminal or VIDEO output terminal The video and audio signals output from the set output terminals are output synchronously (lip synchronization). 49 En 06 About the audio output settings The audio signals that are output differ according to the audio format recorded on the disc and the player's settings. Check on the table below. AUDIO OUT terminal Audio format 2ch2 Multi-channel2 5. 1-channel audio 7. 1-channel audio9 5. 1-channel audio Converted to 2-channel audio 5. 1-channel audio12 Converted to 2-channel audio DTS Digital Surround Dolby Digital DIGITAL OUT terminal Converted to linear PCM audio3 Not converted to linear PCM audio4, 5 HDMI OUT terminal1 PCM6 5. 1-channel audio 7. 1-channel audio9, 10 5. 1-channel audio Auto6, 7, 8 Dolby Digital Dolby Digital Plus Dolby TrueHD11 DTS Digital Surround DTS-HD High Resolution Audio DTS-HD Master Audio13 7. 1-channel audio9, 10 Dolby Digital MPEG-2 AAC BD-ROM Dolby Digital Dolby Digital Plus Dolby TrueHD DTS Digital Surround DTS-HD High Resolution Audio DTS-HD Master Audio Linear PCM BD-R/ -RE Dolby Digital MPEG-2 AAC MPEG Linear PCM DVDVideo Dolby Digital DTS Digital Surround MPEG Linear PCM DVD (VR Dolby Digital format) MPEG Linear PCM Converted to 2-channel audio Converted to 2-channel audio 5. 1-channel audio12 7. 1-channel audio9 Converted to 2-channel audio 5. 1-channel audio Converted to 2-channel audio Converted to 2-channel audio Dolby Digital MPEG-2 AAC 7. 1-channel audio9, 10 5. 1-channel audio 2-channel audio Dolby Digital DTS Digital Surround 5. 1-channel audio Dolby Digital DTS Digital Surround 5. 1-channel audio Converted to 2-channel audio 2-channel audio 5. 1channel audio Converted to 2-channel audio Dolby Digital 5. 1-channel audio Dolby Digital 2-channel audio 1. When outputting linear PCM audio signals, if the number of compatible channels of the connected HDMI device is lower, the signals are output with the number of channels for which the device is compatible. When Audio Output Mode is set to 2 Channel or Multi-channel (page 41). When Dolby Digital Out is set to Dolby Digital PCM, DTS Out is set to DTS PCM, or AAC Out is set to AAC PCM (page 41). When Dolby Digital Out is set to Dolby Digital 1/Dolby Digital 2, DTS Out is set to DTS 1/DTS 2 or AAC Out is set to AAC (page 41). When outputting Dolby Digital or DTS Digital Surround bitstream with settings of Dolby Digital 2 at Dolby Digital Out, DTS 2 at DTS Out, the secondary audio and interactive audio signals are not mixed for output. When HDMI Audio Out is set to PCM or Auto (page 42). When outputting the bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround, the secondary audio and interactive audio signals are not mixed. If the connected HDMI device is not compatible with Dolby TrueHD or Dolby Digital Plus bitstream, the signals are output in Dolby Digital bitstream. If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in DTS Digital Surround bitstream. If the connected HDMI device is not compatible with Dolby Digital or DTS Digital Surround bitstream, the signals are output in linear PCM. Only compatible with 7. 1-channel surround back. 6. 1-channel surround back is output in 7. 1 channels. In other cases, output as audio signals of 5. 1-channels or less. When the output video resolution is set to 576i/480i or 576p/480p, the signals may be output in 2 channel, depending on HDMI High-Speed Transmission setting and/or the connected HDMI device (page 14). When the output video resolution is set to 576i/480i or 576p/480p, the signals may be output in Dolby Digital bitstream, depending on HDMI High-Speed Transmission setting and/or the connected HDMI device (page 14). DTS Digital Surround signals converted to linear PCM audio signals are output. When the output video resolution is set to 576i/480i or 576p/480p, the signals may be output in DTS Digital Surround bitstream, depending on HDMI High-Speed Transmission setting and/or the connected HDMI device (page 14). Caution · Linear PCM audio signals (2 channels) are output from all terminals other than the ones selected at Audio under Output Terminal Priority, regardless of the audio format or the player's settings (pages 19 and 49). · The audio signals output from the DIGITAL OUT terminals have a sampling frequency of 48 kHz (44. 1 kHz for CDs). · MPEG audio is output in linear PCM. 50 En Chapter 7 Additional information Troubleshooting Incorrect operation is often mistaken for trouble or malfunction. [. . . ] THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). [. . . ]