User manual PIONEER CDJ-200

[. . . ] RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain D3-4-2-1-3_A_En or moisture. Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. [. . . ] ¶ The ON/OFF status of the Auto Cue function is stored in memory when the power is turned off. ¶ Auto Cue level is fixed to ­60 dB. ¶ When inserting a disc, keep the label-side up, and insert only one disc into the disc loading slot located in the front panel of the unit. 16) ¶ If a CD-ROM with no MP3 file in the first session is inserted, the display will read [NO TRACK] and the CD-ROM will not be played. The non-recorded portion at the beginning of the displayed track will be skipped and playback will begin instantly. When the first track's playback ends, the player will automatically search for the beginning of the next track. The indicator on the CUE button will light, the PLAY/PAUSE button (6) indicator will flash and the player will then wait for the PLAY/ PAUSE button (6) to be pressed before beginning playback of the next track. When the Auto Cue function is turned off, playback will begin automatically from the first track. ¶ When Auto Cue function is turned off, playback will continue after the first track has been played, with all subsequent tracks being played in sequence. ¶ When playback of the final track is complete, playback will automatically come to an end. When playing MP3s, after the playback of all the tracks inside a folder has finished, the unit will enter the standby mode at the end of the final track. When the PLAY/PAUSE button (6) is pressed, playback will begin from the first track of the same folder. When the same disc is inserted after being ejected once, the disc will be restarted from the place immediately before the disc was ejected. However, the Digital Jog Break function will not be restored. If desired, the TRACK SEARCH button can be pressed before playback begins to perform normal track search and playback. ¶ The CDJ-200 is not provided with a conventional stop button. ¶ In the event the EJECT button (0) is pressed accidentally, immediately (before [EJECT] is displayed in the display) press the PLAY/PAUSE button (6) to cancel the eject command; playback will then restart from the place immediately before the EJECT button (0) was pressed (during this time, sound output will be temporarily interrupted). ¶ When the PLAY/PAUSE button (6) is pressed again, the indicator on the button will light and the playback will continue. ¶ Broken sound will still be audible during the pause mode; to stop all sound, lower the output sound volume of the audio mixer. ¶ If there has not been any operation for more than 100 minutes in the pause mode, the disc rotation will automatically be stopped. By pressing the PLAY/PAUSE button (6), the playback will be resumed from the first track. ¶ The track will accelerate (FWD+ =Clockwise)/slowdown (REV­ =Counter-Clockwise) according to the amount and direction the jog dial is turned. [. . . ] The OUT/OUT ADJUST button was pressed during the playback of an MP3 file other than the one with the cue point (loopin point) set. Attempted to search (fast-forward/fastreverse) MP3s into a different folder. Interference is being picked up from the CD player. The disc rotation stops automatically if no operation has been performed for 100 minutes or more in pause mode. [. . . ]