User manual PIONEER CLD-V300 annexe 1

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_A1_En CAUTION This product is a class 1 laser product, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel. The following caution label appears on your unit. [. . . ] The list screen appears. Individual/Shared Data Erase BD PLAYER Shared Data Disc Name 1 Disc Name 2 Disc Name 3 Disc Name 4 Disc Name 5 Disc Name 6 Disc Name 7 15 items 07 Testing the network connection Select and set Network Connection Test Start. "Network connection test completed successfully. " is displayed once the test is completed. If any other message is displayed, check the connections and/or settings (pages 20 and 44). Changing to other language at language setting 1 Select and set Language. 2 Select and set Audio Language, Subtitle Language or BDMV/DVD-Video Menu Lang. Use / to change, then press ENTER. Initial Setup BD PLAYER Audio Language Video Out Audio Out Language English HDMI Network 0514 Number Language Playback Data Management Setup Navigator When a disc name is selected, the data downloaded with the BD-LIVE function and data used with the BONUSVIEW is erased. When Shared Data is selected, all the data downloaded with the BD-LIVE function and not associated to discs is erased. Use / to select the data to be erased, then press ENTER. · Application Data Erase Use this procedure to erase BD-ROM application data (high scores of games, bookmarks data, etc. ). · Storage Format Use this procedure to format the storage in which the data downloaded with the BD-LIVE function and data used with the BONUSVIEW function is stored (page 7). When this is done, all the data on the external storage device is erased. Use / to select, then press ENTER. · The language can also be changed using the number buttons. Note · The level can be set to Off or between Level1 and Level8. When set to Off, viewing is not restricted. Setting the output terminals Set the terminals from which the player's video and audio signals are to be output. 1 Select and set Options Output Terminal Next Screen. 2 Select and set the video and audio output terminals. Select the actually connected video and audio output terminals. For details on the settings, refer to step 4 on page 21. When COMPONENT VIDEO or VIDEO is selected for Video, no sound is output from the HDMI OUT terminal (a warning message is displayed). 46 En Software updating The software of the player can be updated by connecting it to the Internet using a LAN cable. Before updating the software, make sure that you have connected the player to the network and made the necessary settings (pages 20 and 44). Caution · 10 to 20 minutes are required to update the software. The picture turns off during this process, but do not unplug the power cord until the front panel display turns off. · When the front panel display is off, turn it on with FL DIMMER. [. . . ] Component video signals consist of three signals, Y, PB and PR. DRM A technology for protecting copyrighted digital data. Digitized videos, images and audio retain the same quality even when they are copied or transferred repeatedly. DRM is a technology for restricting the distribution or playback of such digital data without the authorization of the copyright holder. Deep Color See About HDMI on page 16. 69 En 09 DTS Digital Surround DTS Digital Surround is an audio format to record 48 kHz/24 bits audio signals in 5. 1 channels. Port number This is a sub-address provided below the IP address for simultaneously connecting to multiple parties during Internet communications. DTS-HD High Resolution Audio DTS-HD High Resolution Audio is an audio format using lossy coding. It can record 7. 1 channels at 96 kHz/24 bits. Progressive scan With this method, one picture is consisted of a single picture, without dividing it in two pictures. [. . . ]