User manual PIONEER CNDV-900HD 2009 HDD NAVIGATION UPGRADE DISC

[. . . ] 2009 HDD NAVIGATION UPGRADE DISC Upgrade Instructions and Operation Manual Addendum CNDV-900HD Visit www. pioneer. co. uk (or www. pioneer. eu) to register your product English Precaution Percaution · DO NOT LOSE SUPPLIED "MEDIA NUMBER CARD". If "MEDIA NUMBER CARD" is lost, re-creation of the "MEDIA NUMBER" is not possible. Also you must submit the "MEDIA NUMBER CARD" for repairs. The card is necessary as proof of authenticity if service is required (including recovery). [. . . ] You can perform simplified operations by using the TRK (4/6) button and VOL (2/8) button. (We recommend changing the AV source to AM or FM before you start the update. ) ­ The update takes approximately 3 hours in total. ­ If you turn the ignition switch off (the navigation system turns off) or eject the upgrade disc, the update resumes when the navigation system turns on or the disc is reinserted. In this phase, take notice of the followings: ­ No functions are available. ­ The update takes approximately 10 minutes. ­ NEVER stop the engine of your vehicle nor turn off the power supply to the navigation system until the installation is completed. Turning the power off in this phase causes a malfunction or failure of the navigation system. Upgrade procedures 1. Leave the engine on, and make sure that the handbrake is applied. Press the MAP button to display the current location. Be sure to display the map of current position. The updating cannot start at the other screens, such as the scroll mode, the navigation menu and AV screen. 11 Instructions for upgrading 3. Press OPEN CLOSE button and insert the upgrade disc into the disc loading slot. CAUTION For users who use AVIC-HD3II or use the system upgraded to CNDV-800HD, updating another software programme will begin first. While this screen is visible, NEVER switch the key position from ACC or turn off the navigation system. The message "Password obtained from Pioneer should be entered to update. Please press "Cancel" to stop update. " appears. Alternative options: [No] Shows "Device Number" (Device#) of your navigation system. Enter the password for authentication that you obtained, then touch [OK]. After the system is complete, the navigation system restarts. After you touch [OK], the system starts the authentication. When the authentication is finished properly, the message for confirmation will appear. Touch [Yes] to start the update. Check the details of the caution message and touch [OK]. The users who use other models can skip this caution and proceed to next step. The message confirming whether or not to start the update will appear. If the message doesn't appear, eject the disc and display the map of current position and then reinsert the disc. [. . . ] Consult your local Pioneer dealer if this message persist. An error occurred and the update If the disc is dirty. Unexpected error occurred in the Update is restarted by pressing update process. "Retry". 19 Voice recognition Additional Voice Operations Voci erecogni ton Terms written in italics are voice commands. When upgrading AVIC-HD3 or AVIC-HD3II, there are no changes to voice operations. [. . . ]