User manual PIONEER CT-IS21

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This product complies with the Low Voltage Directive (73/23/EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc. [. . . ] Lecture répétée et continue des deux faces jusqu'à un maximum de 16 faces, puis arrêt automatique de la platine-cassette. ¶ Each time the play/direction (2 3) button on the remote control unit is pressed, the direction of travel changes alternately between side A and side B as shown below: 3 (side A) Ô 2 (side B) ¶ When loading the cassette tape in the cassette tray, if the cassette is set with side A facing UP, the "forward" direction (3) will correspond to side A and the "reverse" direction (2) will correspond to side B. To fast forward or fast reverse the tape ¶ Press when the tape is stopped. To search for a particular track (Music Search) While the cassette deck is in the playback mode, press either the 1 or ¡ button ( 4 or ¢ button on the remote control unit). ¶ When the remote control unit is used, music search can also be performed from the stop mode. ¶ Pressing 1 (4) will return the tape to the beginning of the currently playing track. ¶ Pressing ¡ (¢) will advance the tape to the beginning of the next track. NOTE: The music search function may not work correctly when the following tapes are being played back. ¶ Tapes that do not have unrecorded portions of 4 seconds or more between songs. ¶ Tapes containing music with long intervals of low sound such as classical music. ¶ Tapes with interruption of sound, such as meetings and language study tapes. The noise reduction system is turned ON and OFF alternately with each press of the button. : If recording is started from side A (3 direction), recording continues to side B (2 direction). If recording is started from side B (2 direction), recording stops after completion of recording on side B only. When recording a radio broadcast from the tuner, tune in the desired station. ¶ Do not set the function to this cassette tape deck (no recording is possible). The NR system is turned ON and OFF alternately with each press of the button as shown. : : : Single side play (playback stops after one side) Playback stops after completion of playback in the 2 direction. Continuous repeat playback of both sides, up to a maximum of 16 tape sides, after which the cassette deck stops automatically. Lecture répétée et continue des deux faces jusqu'à un maximum de 16 faces, puis arrêt automatique de la platine-cassette. If you wish to change the direction of tape playback (2/3), press the play/direction (2 3) button twice and press the stop (7) button. ¶ The direction of tape travel will be displayed on the display; select the desired direction of travel by pressing the play/direction (2 3) button. [. . . ] before setting the timer: Load the desired playback cassette tape. Then follow the timer playback procedures noted in the Operating Instructions for the CD MD Tuner or CD Tuner Deck, with the following exception: Change step one in the timer playback instructions to the following: Step 2 and subsequent instructions are the same as for normal timer playback on the respective units. Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. [. . . ]