User manual PIONEER CT-J410WR

[. . . ] If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in DTS Digital Surround bitstream. If the connected HDMI device is not compatible with DTS Digital Surround bitstream, the signals are output in linear PCM. Only compatible with 7. 1-channel surround back. 6. 1-channel surround back is output in 7. 1 channels. [. . . ] In other cases, output as audio signals of 5. 1-channels or less. When the output video resolution is set to 576i/480i or 576p/480p, the signals may be output in 2 channel, depending on the HDMI High Speed Transmission setting and/or the connected HDMI device. When the output video resolution is set to 576i/480i or 576p/480p, the signals may be output in DTS Digital Surround bitstream, depending on the HDMI High Speed Transmission setting and/or the connected HDMI device. Caution · The output from all terminals other than the ones selected for Audio does not sound as intended by the content provider. Patent #'s: 5, 451, 942; 5, 956, 674; 5, 974, 380; 5, 978, 762; 6, 226, 616; 6, 487, 535; 7, 392, 195; 7, 272, 567; 7, 333, 929; 7, 212, 872 & other U. S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio | Essential are trademarks of DTS, Inc. All Rights Reserved. < VRY1204-A > Speaker Setup The following settings can be made at the speaker settings: · Size of the different speakers · Whether or not a subwoofer is connected · Crossover frequency This setting is only valid for the AUDIO OUT (7. 1 ch) terminals. The crossover frequency setting is the frequency (Hz) below which the bass component of channels whose speaker size is set to Small is distributed to the subwoofer or left and right channels for output, as well as the frequency (Hz) below which LFE signals (the channel normally output to the subwoofer) are output. · After the functions are added, all of the speaker settings are reset. To use 7. 1-channel analog output signals, check the speaker settings. Image file playback Image files recorded on DVDs or CDs can be played. In this case, set the crossover frequency to something other than Bypass. · By default, the crossover frequency is set to Bypass. · Before the function was added, the crossover frequency was set to 100 Hz if there were speakers whose speaker size was set to Small. Otherwise, it was set to Bypass. 99 items A slideshow starts from the selected file, and continues until the end of the list is reached. Slideshows can also be started by selecting Slideshow from the TOOLS menu. About Slideshow A display of the files on the disc or in the folder that switches automatically. 02 · Use / to display the previous or next file. · Use DISPLAY to display the disc information. · When STOP is pressed during playback, the point at which the disc stopped is stored in the memory. When PLAY is pressed, playback resumes from that point (resume playback function). External subtitle files for DivX files After the functions are added, external subtitle files can be used in addition to the subtitles recorded in the DivX media files. The subtitles can be switched by pressing the SUBTITLE while playing a DivX media file. Rotating images Press ANGLE while playing a slideshow. [. . . ] When PLAY is pressed, playback resumes from that point (resume playback function). External subtitle files for DivX files After the functions are added, external subtitle files can be used in addition to the subtitles recorded in the DivX media files. The subtitles can be switched by pressing the SUBTITLE while playing a DivX media file. Rotating images Press ANGLE while playing a slideshow. · The image rotates each time the button is pressed (90° 180° 270° 0° . . . ). The image can also be rotated by selecting Rotate from the TOOLS menu. About displaying external subtitle files while playing DivX media files In addition to the subtitles recorded in DivX media files, this player also supports the display of external subtitle files. [. . . ]