User manual PIONEER CT-S530

[. . . ] After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug may sometimes differ from that shown in the explanatory drawings. However, the method of connecting and operating the unit is the same. CAUTION The STANDBY/ON switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. [. . . ] Any active Advanced Surround or Pro Logic IIx mode is cancelled, but you can still use the Sound Modes. · To play the source in surround sound, press SURROUND to select a Pro Logic II, Pro Logic IIx or Neo:6 mode. Press repeatedly to select a Pro Logic II, Pro Logic IIx or Neo:6 mode (front panel 2 PRO LOGIC II, 2 PRO LOGIC IIx or NEO:6 indicator lights): · MOVIE ­ (Pro Logic IIx) 6. 1 channel sound, especially suited to movie sources · MUSIC ­ (Pro Logic IIx) 6. 1 channel sound, especially suited to music sources · PROLOGIC ­ (Pro Logic II) 5. 1 channel surround sound · CINEMA ­ (Neo:6) 6. 1 channel sound, especially suited to movie sources · MUSIC ­ (Neo:6) 6. 1 channel sound, especially suited to music sources Note · When playing 88. 2/96 kHz PCM or 88. 2/96 kHz DTS stereo sources, only the STEREO listening mode is available. AUTO STEREO MASTER VOLUME · During playback of a multichannel source, press AUTO for surround sound playback. The 2 DIGITAL or DTS indicator on the front panel lights depending on the source format. Any active Advanced Surround mode is cancelled. · To switch to stereo playback, press STEREO. The STEREO indicator on the front panel lights. Any active Advanced Surround mode is cancelled, but you can still use the Sound Modes. Note · When you play a multichannel source in STEREO, all channels are mixed to the front speakers. 27 En 06 Home theater sound · If the SB CH MODE is switched off, or the surround back speaker setting is S. BACK ­, 2 PRO LOGIC IIx becomes 2 PRO LOGIC II. · During playback of a Dolby Digital multichannel source with the SBch MODE switched ON, you will only be able to select DOLBY EX or MUSIC (Pro Logic IIx). See Using the surround back channel on page 29 for more on this. Note · You can't use the Advanced Surround effects when the multichannel analog inputs (DVD 5. 1ch) are selected, or when playing 88. 2/96 kHz PCM or DTS sources. Using the Sound Modes The Sound Modes create a variety of tonal and dynamic effects that can be used with multichannel or stereo sources. Listening with headphones When headphones are connected, only the STEREO (default) and PHONES SURROUND (virtual surround sound for headphones) modes are available. This should improve the sound quality and allow you to enjoy the broadcast. 2 Press AM/FM and BAND at the same time. Switch between: · 10K STEP ­ FM 100 kHz, AM 10 kHz · 9K STEP ­ FM 50 kHz, AM 9 kHz (default) Tuning directly to a station Sometimes, you'll already know the frequency of the station you want to listen to. In this case, you can simply enter the frequency directly using the number buttons on the remote control. Finding a station The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the exact frequency of the station you want to listen to, see Tuning directly to a station below. Once you are tuned to a station you can memorize the frequency for recall later--see Memorizing station presets below for more on how to do this. BAND D. ACCESS FM/AM TUNE FM/AM TUNE BAND 1 Press the FM/AM button on the remote control to put it in tuner mode. 2 Press BAND (or FM/AM) to change the band (FM or AM), if necessary. Each press switches the band between FM and AM. 3 Press D. ACCESS (Direct access). MPX 1 Press the FM/AM button on the remote control to put it in tuner mode. 2 Press BAND (or FM/AM) to change the band (FM or AM), if necessary. Each press switches the band between FM and AM. 3 Tune to a station using the TUNE +/­ buttons. [. . . ] 1 Dry cell batteries (AA size IEC R6P) . 1 Operating instructions Audio section Input (Sensitivity/Impedance) . . 200 mV/47 k Output (Level/Impedance) VIDEO , DVR/VCR . 200 mV/2. 2 k Note · Specifications and the design are subject to possible modifications without notice, due to improvements. Video section Input (Sensitivity/Impedance) . [. . . ]