User manual PIONEER CT-W205R SERVICE MANUAL

[. . . ] To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed. Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e. [. . . ] If the sound is distorted after you lower the volume of the unit, try lowering the volume on the auxiliary playback component. Connect the front panel AUX IN mini-plug jack to your auxiliary playback component. â· This method can be used to play music on this unit from iPods/iPhones that do not support use of an iPod Dock. When Auto mode select is set to Power Save mode, if the function is set to AUX but no input is connected to the AUX IN connector and no other control operation is performed for 30 minutes, the unit will automatically turn off. This unit's front panel The factory default settings are indicated in italic. Use / to select the item, then press ENTER. follow the descriptions on the main display to change the setting. What it does Setting the wake-up timer and the time the unit will be turned on. When On (Standby) is selected, the clock will appear in the sub-display even when the power is set to Off. Time Zone can be adjusted only when Clock Adjustment is set to Auto. If you are in Hawaii (GMT -10:00), use / to select Hawaii and press ENTER. Change the setting for example when watching movies late at night. â· This setting only affects Dolby Digital sound. Try different settings, and choose the one providing the strongest effect. Change this setting if the dialog sound is too low and hard to hear. This setting only affects multichannel sound. Adjusts the look of the dark portions of the picture. This setting is effective for sources with many colors, such as cartoons. Brightness, Contrast, Gamma, Hue and Chroma Level are set to 0 upon purchase. Use these settings to make detailed unit settings. â· Initial Settings cannot be selected during playback. Settings HDMI Out What it does Select the audio signals to be output from the HDMI OUT terminal (LPCM (2CH)/Auto/Off ) according to the connected HDMI-compatible device. [. . . ] The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability Guidelines. This unit complies with DLNA Interoperability Guidelines v1. When a PC running DLNA server software or other DLNA compatible device is connected to this player, some setting changes of software or other devices may be required. Even when encoded in a compatible format, some files may not play correctly. [. . . ]