User manual PIONEER CT-W802R

[. . . ] Also, damage to this unit, smoke, and overheating could result from contact with liquids. "CLASS 1 LASER PRODUCT" This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Always keep the volume low enough so that you can hear sounds from outside the vehicle. [. . . ] If you do not operate functions within about 30 seconds, the display automatically returns to the ordinary display. When CONTROL is on, only CONTROL, PAUSE and SOUND RETRIEVER can be operated. Playing songs in a random order (shuffle) ALBUMS ­ Play back songs from a randomly selected album in order. However, the repeat play ranges you can select are different from that of the built-in CD player. Playing all songs in a random order (shuffle all) # To turn shuffle all off, set SHUFFLE in the FUNCTION menu to off. Note You can also turn this function on in the menu that appears by using MULTI-CONTROL. Selecting songs from lists related to the currently playing song Lists related to the currently playing song are displayed. You can select songs from the following lists. -- Album list of currently playing artist -- Song list of currently playing album -- Album list of currently playing genre !Depending on the number of files in the iPod, there may be a delay when displaying a list. ALBUM ­ Displays the song list of currently playing album. If you do not operate functions within about 30 seconds, the display automatically returns to the ordinary display. You can change the fader/balance setting so that it can provide the ideal listening environment in all occupied seats. Front/rear speaker balance can be adjusted between FAD F15 and FAD R15. Left/right speaker balance can be adjusted between BAL L15 and BAL R15. # You can also perform the same operations by pushing MULTI-CONTROL up or down. # FAD 0 is the proper setting when only two speakers are used. When the subwoofer controller setting is PREOUT:REAR, you cannot switch to SW SETTING 1 (subwoofer on/off setting). You can select the SW SETTING 2 only when subwoofer output is turned on in SW SETTING 1. There are six stored equalizer curves which you can easily recall at any time. Press MULTI-CONTROL repeatedly to switch the segment in the following order: L (low)--M (mid)--H (high) 4 Turn MULTI-CONTROL to adjust the level of the equalization band. # You can then select another band and adjust the level. [. . . ] This unit is not compatible with SDAudio. Folder selection sequence or other operation may be altered depending on the encoding or writing software. Folder hierarchy is allowed up to eight tiers. However, a practical hierarchy of folder is less than two tiers. [. . . ]