User manual PIONEER CT-W820R

[. . . ] Also, damage to this unit, smoke, and overheating could result from contact with liquids. "CLASS 1 LASER PRODUCT" This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Always keep the volume low enough so that you can hear sounds from outside the vehicle. [. . . ] You can enjoy entertainment displays while listening to each sound source. BGV (background visual)--BGP-1 (background picture 1)--BGP-2 (background picture 2)--BGP-3 (background picture 3)-- BGP-4 (background picture 4)--SIMPLE-1 (simple display 1)--SIMPLE-2 (simple display 2)--LEVEL METER (level meter)-- VISUALIZER-1 (visualizer 1)--VISUALIZER-2 (visualizer 2)--SPECTRUM ANALYZER-1 (spectrum analyzer 1)-- SPECTRUM ANALYZER-2 (spectrum analyzer 2)--MOVIE-1 (movie 1)--MOVIE-2 (movie 2) You can use this unit to control an interface adapter for iPod (e. Play time-- : artist name and : song title -- : artist name and : album name-- : album name and : song title-- : song title and play time # If the characters recorded on the iPod are not compatible with this unit, those characters are not displayed. % Fast forward or reverse Push and hold MULTI-CONTROL left or right. % Select a track Push MULTI-CONTROL left or right. Read the precautions for iPod in the following section. When the ignition switch is set to ACC or ON, the iPod's battery is charged while the iPod is connected to this unit. While the iPod is connected to this unit, the iPod cannot be turned on or off. Before connecting the dock connector of this unit to the iPod, disconnect the headphones from the iPod. The iPod is turned off about two minutes after the ignition switch is set to OFF. You can scroll the text information to the left by pressing and holding DISP/SCRL. If you do not operate functions other than Connection open and Disconnect audio within about 30 seconds, the display is automatically returned to the ordinary display. % Fast forward or reverse Push and hold MULTI-CONTROL left or right. % Select a track Push MULTI-CONTROL left or right. This section provides brief information on Bluetooth audio player operations with this unit, which slightly differs or is abbreviated from that described in the Bluetooth adapter's operation manual. Even though your audio player does not contain a Bluetooth module, you can still control it from this unit via Bluetooth wireless technology. To control your audio player using this unit, connect a product featuring Bluetooth wireless technology (available on the market) to your audio player and connect the Bluetooth adapter (e. This unit is now on standby for connection from Bluetooth audio player. If your Bluetooth audio player is set ready for Bluetooth wireless connection, connection to this unit is automatically established. Note Before you can use audio players you may need to enter the PIN code into this unit. If your player requires a PIN code to establish a connection, look for the code on the player or in its accompanying documentation. Playing songs on a Bluetooth audio player CDBTB100), you can connect a cellular phone featuring Bluetooth wireless technology to this unit for hands-free, wireless calls, even while driving. [. . . ] Name view (visualización de nombres del directorio de teléfonos)-- Clear memory (borrar memoria)-- Number dial (llamar introduciendo un número)--Refuse calls (ajuste de rechazo automático)--Auto answer (ajuste de respuesta automática)--Ring tone (selección de tono de llamada)--Auto connect (ajuste de conexión automática)--Echo cancel (cancelación de eco)--Device info. Disconnect phone (desconectar teléfono) Set phone (registro de teléfono) Clear memory (borrar memoria) PH. Search & Connect (buscar y conectar) Connection open (conexión abierta) Connect phone (conectar teléfono) Set phone (registro de teléfono) Notas !Name view, Clear memory, Number dial ni Refuse calls. [. . . ]