User manual PIONEER DDJ-SR

[. . . ] DJ Controller DDJ-SR http://pioneerdj. com/support/ http://serato. com/ The Pioneer DJ support site shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. For the latest version of the Serato DJ software, access Serato. com and download the software from there. Operating Instructions Contents How to read this manual ! Thank you for buying this Pioneer product. Be sure to read both this leaflet and Read Before Use (Important)/ Quick Start Guide!Both documents include important information that you must understand before using this product. For instructions on obtaining the Serato DJ software’s manual, see Acquiring the manual (p. 32). [. . . ] Operate the effect parameter 3 control to adjust the parameter of the third effect. Press the [FX ASSIGN] 1 button to assign the effect to deck 1, the [FX ASSIGN] 2 button to assign the effect to deck 2. The number of the deck to which the effect is assigned is highlighted on the Serato DJ screen. ! Press the [FX ASSIGN] 1 button while pressing the [SHIFT] button to assign the effect to deck 3, press the [FX ASSIGN] 2 button while pressing the [SHIFT] button to assign the effect to deck 4. ! To apply the effect to the master output, click [M] on the computer. 3 Press one of the effect parameter buttons while pressing the [SHIFT] button to select the effect type. The selected effect is displayed on the Serato DJ screen. 4 Press the effect parameter 1 button to turn the effect on. The effect switches between on and off each time the button is pressed. ! The effect’s [ON] key is highlighted on the Serato DJ screen. 6 Turn the [FX BEATS] control to adjust the effect time. 5 Operate the effect parameter 2 button or the effect parameter 3 button to switch the effect’s parameter. ! It is also possible to set the BPM value to be used as the basis for the effect time from the interval at which the [TAP (FX MODE)] button is tapped. For details, see Switching the effect’s tempo mode on page 22. ! Depending on the type of effect, the button may not light when it is operated. Operating in the single FX mode 1 Press the [TAP (FX MODE)] button while pressing the [SHIFT] button to switch Serato DJ’s DJ-FX mode to the single FX mode. The mode switches between the multi FX mode and single FX mode each time the buttons are operated. 6 Operate the effect parameter control(s) to adjust the effect’s parameter(s). En 21 7 Turn the [FX BEATS] control to adjust the effect time. Mixing the sound of the microphone When a wireless microphone or other device with a high output level is connected, the sound of the microphone may be distorted. If the output level can be switched or the gain can be adjusted, adjust the signal level input to this unit’s microphone jack to the lowest level possible. For details, see the operating instructions of the connected device you are using. ! The standard input level/input impedance of this unit’s microphone jack is –52 dBu/10 kW. ! It is also possible to set the BPM value to be used as the basis for the effect time from the interval at which the [TAP (FX MODE)] button is tapped. For details, see Switching the effect’s tempo mode on page 22. 1 Connect the microphone to the [MIC] terminal. 2 Start up the system. = Starting the system (p. 14) 3 Turn the [MIC LEVEL] control. Switching the effect’s tempo mode With Serato DJ effects, there are two ways to set the effect’s tempo: with the “auto tempo mode” and the “manual tempo mode”. ! By default, the auto tempo mode is set. This adjusts the output audio level. Pay attention that rotating to the extreme right position outputs a very loud sound. Mixing the sound of a DJ player, etc. 1 Connect a DJ player or other line level output device to the [AUX IN] terminals. 2 Start up the system. = Starting the system (p. 14)  Auto tempo mode The track’s BPM value is used as the basis for the effect’s tempo.  Manual tempo mode The BPM value used as the effect’s basis is calculated from the interval at which the [TAP (FX MODE)] button is tapped. 3 Adjust the level using the [AUX IN LEVEL] control on this unit’s rear panel.  Switching to the manual tempo mode While in the auto tempo mode, press the [TAP (FX MODE)] button three times. ! When the [TAP (FX MODE)] button is pressed for over 1 second while in the manual-tempo mode, the mode switches to the auto tempo mode. Outputting sound to a booth monitor 1 Connect powered speakers, etc. , for booth monitoring to the [BOOTH OUT/MASTER OUT 2] terminals on this unit’s rear panel. 2 Start up the system. = Starting the system (p. 14) Using the channel fader start function With this function, a temporary cue point is set with the channel fader and playback starts from the temporary cue point when the channel fader is moved away from you. ! This function does not work when the channel fader start setting is disabled in utilities mode 1. = For instructions on changing the setting, see Launching utilities mode 1 (p. 26). 3 Slide the [BOOTH/MASTER] selector switch on this unit’s rear panel to the [BOOTH] side. 4 Operate the [BOOTH LEVEL] control to adjust the audio level output from the booth monitor. 1 Set the cue. Pause at the position from which you want to start playback, then press the [CUE] button for the corresponding deck. ! Cues can also be set by moving the channel fader from the back to the position nearest you while pressing the [SHIFT] button in the pause mode. Analyzing tracks When one of this unit’s [LOAD] buttons is pressed and tracks are loaded onto the decks, the tracks are analyzed, but some time may be required until analysis is completed and the BPM and waveform are displayed. When the Serato DJ software is used as an offline player, tracks can be analyzed ahead of time. For tracks whose analysis has been completed, the BPM and waveform are displayed immediately when the tracks are loaded onto the decks. For details on using the Serato DJ software as an offline player and instructions on analyzing tracks, see the Serato DJ software manual. [. . . ] The names of companies and products mentioned herein are the trademarks of their respective owners. This product has been licensed for nonprofit use. This product has not been licensed for commercial purposes (for profit-making use), such as broadcasting (terrestrial, satellite, cable or other types of broadcasting), streaming on the Internet, Intranet (a corporate network) or other types of networks or distributing of electronic information (online digital music distribution service). You need to acquire the corresponding licenses for such uses. [. . . ]