User manual PIONEER DEH-1650B

[. . . ] Never use force or grip the display and the buttons tightly when removing or attaching. Keep the front panel out of direct sunlight and high temperatures. 1 Press DETACH to release the front panel. Press DETACH and the right side of the panel is released from the head unit. [. . . ] % Press LOCAL/BSM and hold until the BSM turns on. While BSM is flashing the six strongest broadcast frequencies will be stored under preset tuning buttons 16 in order of their signal strength. Do not use an adapter when playing 8-cm CDs. Do not insert anything other than a CD into the CD loading slot. If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. If the built-in CD player does not operate properly, an error message such as ERROR-11 may be displayed. 1 Track number indicator Shows the track currently playing. Playing tracks in a random order Random play lets you play back tracks on the CD in a random order. 5 To skip back or forward to another track, press c or d. Repeat play lets you hear the same track over again. The track currently playing will play and then repeat. The track currently playing will continue to play and then play the next track. Note If you perform track search or fast forward/reverse, repeat play is automatically cancelled. Play will resume at the same point that you turned pause on. Each press of a or b moves the front/rear speaker balance towards the front or the rear. fAD F15 FAD R15 is displayed as the front/ rear speaker balance moves from front to rear. # FAD 0 is the proper setting when only two speakers are used. 2 LOUD indicator Appears in the display when loudness is turned on. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)EQ (equalizer) LOUD (loudness)FIE (front image enhancer)SLA (source level adjustment) Each press of c or d moves the left/right speaker balance towards the left or the right. # To return to the display of each source, press BAND. There are six stored equalizer curves which you can easily recall at any time. [. . . ] If the error cannot be corrected, contact your dealer or your nearest Pioneer Service Center. Turn the ignition ON and OFF, or switch to a different source, then back to the CD player. CDs that have cracks, scratches or are warped may not play properly. Store discs in their cases when not in use. [. . . ]