User manual PIONEER DEH-2300UB

[. . . ] Thank you for purchasing this PIONEER product. To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. [. . . ] TITLE (multi-language) This unit can display the text information of a compressed audio file even if they are embedded in a Western European or Russian language. If the embedded language and the selected language setting are not the same, text information may not be displayed properly. Some characters may not be displayed properly. Switching this function on enables you to reduce the consumption of battery power. Turning on the source is the only operation allowed when this function is on. After selecting, perform the following procedures to set the initial setting. You can turn the clock display on or off. The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on. The tuning step remains at 50 kHz during manual tuning. AUTO-PI (auto PI seek) The unit can automatically search for a different station with the same programming, even during preset recall. AUX (auxiliary input) Activate this setting when using an auxiliary device connected to this unit. Note AUX cannot be selected unless the auxiliary setting is turned on. Important PW SAVE (power saving) is cancelled if the vehicle battery is disconnected and will need to be turned back on once the battery is reconnected. When PW SAVE (power saving) is off, depending on connection methods, the unit may continue to draw power from the battery if your vehicle's ignition switch doesn't have an ACC (accessory position). A call is made or received using a cell phone connected to this unit. Voice guidance is output from a connected Pioneer navigation unit. The sound is turned off, MUTE is displayed and no audio adjustments, except volume control, are possible. Operation returns to normal when the phone connection or the voice guidance is ended. 1 Press and hold S (SRC/OFF) until the unit turns off. When installing this unit in a vehicle without an ACC (accessory) position on the ignition switch, failure to connect the red cable to the terminal that detects operation of the ignition key may result in battery drain. [. . . ] Do not leave discs or a USB storage device in any place that is subject to high temperatures. The user cannot assign folder numbers and specify playback sequences with this unit. Playable folder hierarchy: up to eight tiers (A practical hierarchy is less than two tiers. Do not connect anything other than a USB storage device. [. . . ]