User manual PIONEER DEH-3850MP

[. . . ] The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals. Always keep the volume low enough so you can hear sounds outside of the car. [. . . ] If the multi-CD player does not operate properly, an error message such as ERROR-11 may be displayed. If there are no discs in the multi-CD player magazine, NO DISC is displayed. You can use this unit to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page. 3 Track number indicator Shows the track currently playing. 3 Select a disc you want to listen to with the 16 buttons. for discs located at 1 to 6 , press the corresponding number button. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display. Only those functions described in this manual are supported for 50-disc multi-CD players. Press c or d until the desired repeat range appears in the display. If ITS play is already on, skip to step 2. If ITS play is not already on, press FUNCTION. 1 Play a CD you want to delete a track from your ITS playlist, and turn ITS play on. Refer to Playback from your ITS playlist on this page. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION until ITS appears in the display. 3 Select a desired track by pressing c or d. 4 Press b to erase a track from your ITS playlist. The currently playing selection is erased from your ITS playlist and playback of the next track from your ITS playlist begins. ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to play. [. . . ] Each press of b will display a letter in the reverse order, such as Z Y X . 3 Press d to move the cursor to the next character position. When the letter you want is displayed, press d to move the cursor to the next position and When problems occur during CD play an error message may appear on the display. If an error message appears on the display refer to the table below to see what the problem is and the suggested method of correcting the problem. [. . . ]