User manual PIONEER DEH-434R OPERATION MANUAL

[. . . ] ) 12 Adjusting source levels 12 Initial Settings Adjusting initial settings 13 Setting the clock 13 Turning the clock display on or off 13 Setting the FM tuning step 13 Setting the AM tuning step 14 Additional Information Understanding built-in CD player error messages 15 CD player and care 15 CD-R/CD-RW discs 15 Specifications 17 This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This operation manual will help you benefit fully from this units potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this unit. [. . . ] The next time you press the same preset tuning button 16 the radio station frequency is recalled from memory. Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory. The frequencies move up or down step by step. You can also use a and b to recall radio station frequencies assigned to preset tuning buttons 16. Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 16. Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 2 When you want to return to normal seek tuning, press LOCAL/BSM to turn local seek tuning off. BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning buttons 16 and once stored there you can tune in to those frequencies with the touch of a button. % Press LOCAL/BSM and hold until the BSM turns on. While BSM is flashing the six strongest broadcast frequencies will be stored under preset tuning buttons 16 in order of their signal strength. Do not use an adapter when playing 8-cm CDs. This is useful to check the effect of the equalizer curves by switching alternatively between EQ FLAT and a set equalizer curve. Press EQ repeatedly to switch between the following equalizers: SPR-BASSPOWERFULNATURAL VOCALCUSTOMEQ FLAT You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ-L/EQ-M/EQ-H). Each press of c or d selects equalizer bands in the following order: EQ-L (low)EQ-M (mid)EQ-H (high) 3 Press a or b to adjust the level of the equalizer band. Each press of a or b increases or decreases the level of the equalization band. Note If you make adjustments when a curve other than CUSTOM is selected, the newly adjusted curve will replace the previous curve. Then a new curve with CUSTOM appears on the display while selecting the equalizer curve. # You can then select another band and adjust the level. Note If you make adjustments when a curve other than CUSTOM is selected, the newly adjusted curve will replace the previous curve. Then a new curve with CUSTOM appears on the display while selecting the equalizer curve. Each press of c or d selects frequency in the following order: 100160250 (Hz) Function on, use the balance adjustment (refer to page 10) and adjust front and rear speaker volume levels until they are balanced. Each press of c or d selects level in the following order: LOW (low)MID (mid)HI (high) Note You can also turn loudness on or off by pressing LOUDNESS. [. . . ] % Press CLOCK to turn the clock display on or off. Each press of CLOCK turns the clock display on or off. # The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds. The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. [. . . ]