User manual PIONEER DEH-P2950MP

[. . . ] Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals. If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. [. . . ] If you connect a multi-CD player, you can input disc titles for up to 100 discs. You can display the title of any disc that has had a disc title entered. Press DISPLAY repeatedly to switch between the following settings: Play timeDISC TTL (disc title) When you select DISC TTL, the title of the currently playing disc is shown in the display. 5 To skip back or forward to another track, press c or d. When the multi-CD player performs the preparatory operations, READY is displayed. If the multi-CD player does not operate properly, an error message such as ERROR-11 may be displayed. If there are no discs in the multi-CD player magazine, NO DISC is displayed. You can use this unit to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page. 3 Track number indicator Shows the track currently playing. If you turn scan play on during DSC and then return to the playback display, DSCAN appears in the display. You can use ITS to enter and playback up to 99 tracks per disc, up to 100 discs (with the disc title). (With multi-CD players sold before the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist. 2 Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION repeatedly, the following functions appear in the display: TITLE IN (disc title input)ITS (ITS programming) 3 Select a desired track by pressing c or d. 4 Press a to store the currently playing track in the playlist. ITS IN is displayed briefly and the currently playing selection is added to your playlist. Note After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one. # If no tracks in the current range are programmed for ITS play then EMPTY is displayed. Playback will continue in normal order from the currently playing track and CD. Erasing a track from your ITS playlist When you want to delete a track from your ITS playlist, you can if ITS play is on. [. . . ] 3 Press d to move the cursor to the next character position. When the letter you want is displayed, press d to move the cursor to the next position and When problems occur during CD play an error message may appear on the display. If an error message appears on the display refer to the table below to see what the problem is and the suggested method of correcting the problem. If the error cannot be corrected, contact your dealer or your nearest Pioneer Service Center. [. . . ]