User manual PIONEER DEH-P3590MP

[. . . ] Multi-CD control High power CD/MP3 player with RDS tuner Reproductor de CD/MP3 de alta potencia con sintonizador de RDS y control de CD múltiple Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Before You Start About this unit 4 About this manual 4 Precautions 4 In case of trouble 4 Features 4 Protecting your unit from theft 5 Removing the front panel 5 Attaching the front panel 5 Whats What Head unit 6 Power ON/OFF Turning the unit on 7 Selecting a source 7 Turning the unit off 7 Tuner Listening to the radio 8 Introduction of advanced tuner operation 9 Storing and recalling broadcast frequencies 9 Tuning in strong signals 9 Storing the strongest broadcast frequencies 10 RDS Introduction of RDS operation 11 Switching the RDS display 11 Receiving PTY alarm broadcasts 11 Selecting alternative frequencies 12 Using PI Seek 12 Using Auto PI Seek for preset stations 12 Limiting stations to regional programming 12 Receiving traffic announcements 13 Responding to the TP alarm 13 Using news program interruption 14 PTY list 14 Built-in CD Player Playing a CD 15 Introduction of advanced built-in CD player operation 16 Repeating play 16 Playing tracks in a random order 16 Scanning tracks of a CD 16 Pausing CD playback 17 Selecting the search method 17 Searching every 10 track in the current disc 17 Using disc title functions 18 Entering disc titles 18 Displaying disc titles 18 Using CD TEXT functions 19 Displaying titles on CD TEXT discs 19 Scrolling titles in the display 19 MP3 Player Playing a MP3 20 Introduction of advanced built-in CD player (MP3) operation 21 Repeating play 21 Playing tracks in a random order 22 Scanning folders and tracks 22 Pausing MP3 playback 23 Selecting the search method 23 Searching every 10 track in the current folder 23 Switching the ID3 tag display on MP3 disc 23 Displaying text information on MP3 disc 24 Scrolling text information in the display 24 Multi-CD Player Playing a CD 25 50-disc multi-CD player 25 Introduction of advanced multi-CD player operation 26 Repeating play 26 Playing tracks in a random order 26 Scanning CDs and tracks 27 Pausing CD playback 27 Using ITS playlists 27 Creating a playlist with ITS programming 27 Playback from your ITS playlist 28 Erasing a track from your ITS playlist 28 Erasing a CD from your ITS playlist 29 Using disc title functions 29 Entering disc titles 29 Displaying disc titles 30 Using CD TEXT functions 30 Displaying titles on CD TEXT discs 30 Scrolling titles in the display 30 Using compression and bass emphasis 30 Audio Adjustments Introduction of audio adjustments 31 Using balance adjustment 31 Using the equalizer 31 Recalling equalizer curves 32 Adjusting equalizer curves 32 Fine adjusting equalizer curve 32 Adjusting loudness 33 Front image enhancer (F. [. . . ] Searching every 10 track in the current folder If the current folder contains over 10 tracks, you can search every 10 track. When the one folder contains a lot of tracks, you can roughly search the track you want to play. Refer to Selecting the search method on this page. 2 Press and hold c or d to search every 10 track in the current folder. You can switch the search method between fast forward/reverse and searching every 10 track. # If the current folder contains less than 10 tracks, pressing and holding d recalls the last track of the folder. Also, if the remaining number of tracks after searching every 10 tracks are less than 10, pressing and holding d recalls the last track of the folder. # If the current folder contains less than 10 tracks, pressing and holding c recalls the first track of the folder. Also, if the remaining number of tracks after searching every 10 tracks are less than 10, pressing and holding c recalls the first track of the folder. It is possible to turn the ID3 tag display on MP3 disc on or off, if MP3 disc contains the ID3 tag. Press c or d until the desired search method appears in the display. ROUGH Searching every 10 track Note When you turn the ID3 tag on, this unit returns to the beginning of the current track in order to read the text information. You can scroll the text to the left so that the rest of the text information can be seen. Press DISPLAY repeatedly to switch between the following settings: Play timeFOLDER (folder name)FILE (file name)TRK TTL (track title)ART NAME (artist name)ALBM TTL (album title) COMMENT (comment)Bit rate # When playing back files recorded as VBR (variable bit rate) files, the bit rate value is not displayed even after switching to bit rate. ) # When you have turned ID3 tag display off, you cannot switch to TRK TTL, ART NAME, ALBM TTL and COMMENT. This unit can display the first 8 letters only of FOLDER, FILE, TRK TTL, ART NAME, ALBM TTL and COMMENT. When the recorded information is longer than 8 letters, 5 To skip back or forward to another track, press c or d. When the multi-CD player performs the preparatory operations, READY is displayed. If the multi-CD player does not operate properly, an error message such as ERROR-11 may be displayed. If there are no discs in the multi-CD player magazine, NO DISC is displayed. You can use this unit to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. [. . . ] This unit plays back files with the filename extension (. To prevent noise and malfunctions, do not use this extension for files other than MP3 files. 2 Second level 3 Third level It is not possible to check folders that do not include MP3 files. MP3 files in up to 8 tiers of folders can be played back. [. . . ]