User manual PIONEER DEH-P8000R

[. . . ] If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. [. . . ] ) No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station. Sound may be temporarily interrupted by another program during an AF frequency search. When you tune in an RDS station its program service name is displayed. Press DISPLAY repeatedly to switch between the following settings: Program service namePTY information Frequency AF can be turned on or off independently for each FM band. TA (traffic announcement standby) lets you receive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a station that broadcasts traffic information) or an enhanced other networks TP station (a station carrying information which cross-references TP stations). 1 Tune in a TP or enhanced other networks TP station. When you are tuned into a TP or enhanced other networks TP station the TP indicator will light. # To turn traffic announcements standby off, press TA again. If the unit fails to find a suitable alternative frequency, or if you are listening to a broadcast and the reception becomes weak, the unit will automatically search for a different station with the same programming. During the search, PI SEEK is displayed and the output is muted. For MP3/WMA/WAV playback, you can select a desired repeat range from among FRPT (folder repeat), RPT (one-track repeat) and disc repeat. % When playing a CD, press 5 repeatedly to turn repeat play on or off. When repeat play is on, RPT appears in the display. # If you select ROUGH, pressing and holding c or d enables you to search every 10 tracks in the current disc (folder). (Refer to Searching every 10 tracks in the current disc or folder on the next page. 4 To skip back or forward to another track, press c or d. Do not use an adapter when playing 8-cm CDs. Do not insert anything other than a CD into the CD loading slot. There is sometimes a delay between starting up CD playback and the sound being issued. When playing discs with MP3/WMA/WAV files and audio data (CD-DA) such as CD-EXTRA and MIXED-MODE CDs, both types can be played only by switching mode between MP3/ WMA/WAV and CD-DA with BAND. If you have switched between playback of MP3/WMA/WAV files and audio data (CD-DA), playback starts at the first track on the disc. [. . . ] The tuning step remains at 50 kHz during manual tuning. 2 Press a or b to turn power save on or off. When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message. Turn the ignition ON and OFF, or switch to a different source, then back to the CD player. [. . . ]