Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PIONEER DEH-P8100BT. We hope that this PIONEER DEH-P8100BT user guide will be useful to you.
Lastmanuals help download the user guide PIONEER DEH-P8100BT.
Detailed instructions for use are in the User's Guide.
[. . . ] If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal. Never connect blue/white cable to external power amp's power terminal. Also, never connect it to the power terminal of the auto antenna. [. . . ] (If the trim ring is attached upside down, the trim ring will not fit properly. ) · It becomes easy to remove the trim ring if the front panel is released. When installing, to ensure proper heat dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents. Leave ample space Dashboard When installing in a shallow space, use a supplied mounting sleeve. If there is enough space behind the unit, use factory supplied mounting sleeve. The cords must not cover up the area shown in the figure. This is necessary to allow the amplifiers to radiate freely. Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place. Insert the supplied extraction keys into both sides of the unit until they click into place. Install the microphone in a position and orientation that will enable it to pick up the voice of the person operating the system. It is extremely dangerous to allow the microphone lead to become wound around the steering column or gearstick. Be sure to install the unit in such a way that it will not obstruct driving. Determine the appropriate position where the holes on the bracket and the side of the unit match. Use either truss screws (5 mm × 8 mm) or flush surface screws (5 mm × 9 mm), depending on the shape of screw holes in the bracket. Use separately sold clamps to secure the lead where necessary inside the vehicle. Avoid installing this unit in such a location where the operation of safety devices such as airbags is prevented by this unit. [. . . ] When installing the unit, select a location that assures optimum transmission of signals from the unit to the car stereo. When the unit is installed on a right-hand-drive car, the horizontal positions are inverted. 5 If some of the belt still protrudes, fold it back into the slot so that it does not interfere with driving. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER DEH-P8100BT
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER DEH-P8100BT will begin.
PIONEER DEH-P8100BT QUICK START (4640 ko)
