User manual PIONEER DJM-1000

[. . . ] Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. [. . . ] LINE: Phone type connector (when a monaural signal is connected to only the L channel, the signal is input to both L and R channels). CD/LINE: RCA type connector with line level input. PHONO: RCA type connector with phono level input. LINE: Phone type connector (when a monaural signal is connected to only the L channel, the signal is input to both L and R channels). CD/LINE: RCA type connector with line level input. PHONO: RCA type connector with phono level input. When multiple buttons are pressed at once, the selected audio sounds are mixed. When a button is pressed again, the selection is canceled. The buttons of unselected sources light dimly, and the buttons of the selected sources light brightly. LINE: Phone type connector (when a monaural signal is connected to only the L channel, the signal is input to both L and R channels). CD/LINE: RCA type connector with line level input. PHONO: RCA type connector with phono level input. CD/LINE: RCA type connector with line level input. PHONO: RCA type connector with phono level input. Selects which side of the cross fader the output from each channel is directed to. THRU: The channel output is directed to the master output without going through the cross fader. CD/LINE: RCA type connector with line level input. PHONO: RCA type connector with phono level input. The audio directed to either the A side or B side by the CROSS FADER ASSIGN switch for each channel is output in accordance with the cross fader curve set by the CURVE ADJUST dial (CROSS FADER). MONO SPLIT: The audio source selected by the headphone CUE button is output from the left channel, and the master audio is output from the right channel (Only when MASTER is selected with the headphone CUE button). (Adjustable range: ­ to 0 dB) The master output is the combination of the channel whose audio has been set to [THRU] by the CROSS FADER ASSIGN switch, together with the audio passed through the cross fader and the audio from the main microphone (depending on the mode, RETURN input will also be added). When turned clockwise (MASTER direction) the master output audio is output (only when MASTER is selected with the headphone CUE button); when turned counterclockwise (CUE direction), the audio output will be a mixture of the sound from the channel selected with the headphone CUE button, and the sound coming from the external effector (RETURN). [. . . ] When the connections described above have been made, moving the channel fader slider produces the same effects as when operating the EFX-1000's jog dial. Use the SEND channel selector switches to select the channel to be used for fader effects (channel [1]-[6] can be selected). Note: The sound volume for the channel selected will become the same as that set with the maximum channel fader; as a result, make your selection after confirming the level of sound produced when the channel fader is set to maximum. The EFX-1000's digital job break meter and sound will change in response to the position of the channel fader. [. . . ]