Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PIONEER DJM-2000. We hope that this PIONEER DJM-2000 user guide will be useful to you.
Lastmanuals help download the user guide PIONEER DJM-2000.
Detailed instructions for use are in the User's Guide.
[. . . ] The first page of the documentation accompanying the fader modules states that you should not attempt the installation yourself and it is recommended that you take your mixer to an authorized Pioneer service center to have this kit installed. [. . . ] Please keep in mind that while this is not an overly technical task, there is the potential of doing damage to your mixer should you not pay careful attention and follow these steps in order. Your warranty will not cover damaged caused by improper rotary kit installation should you decide to install it yourself.
Tools Required: A #1 Phillips (+ shape) screwdriver and your fingers. The box contains: 4 channel and 1 master rotary channel modules, 5 rotary knobs, 12 EQ caps and a faceplate.
Step 1: Remove all fader and channel caps from the 4 channels plus master. If they do not slide off easily, do NOT wiggle them, pull firmly upwards and they will come off.
Step 2: Unscrew the 4 corner screws from the channel fader faceplate. Be careful not to bend the pins!
step 4 cont. . .
. . . step 4 cont.
Step 5: Place the new rotary faceplate over the channel faders and screw it into place. Do not over-tighten the corner screws, as you don't want to strip the screw-heads.
Step 6: Add the knobs from the rotary package on to the faders, aligning the flat side accordingly. Press the knob down gently onto the spindle. Place the new channel EQ caps on the EQ spindles.
Step 7: Pack your old faders and knobs into the rotary kit box. [. . . ] Use the anti-static bags from the rotary modules for the inline modules, placing the slider at the middle of the travel so it will fit into the foam.
Step 8: Enjoy your new rotary equipped DJM-2000!
This installation guide and all photos created by GaryO and DJ Pulse. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER DJM-2000
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER DJM-2000 will begin.
PIONEER DJM-2000 MANUAL 2 (7581 ko)
